Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2019, Article ID 3960864, 24 pages
https://doi.org/10.1155/2019/3960864
Research Article

Influence of Backfill Compaction on Mechanical Characteristics of High-Density Polyethylene Double-Wall Corrugated Pipelines

Hongyuan Fang,1,2,3 Peiling Tan,1,2,3 Bin Li,1,2,3 Kangjian Yang,1,2,3 and Yunhui Zhang1,2,3

1School of Water Conservancy and Engineering, Zhengzhou University, Zhengzhou 450001, China
2National Local Joint Engineering Laboratory of Major Infrastructure Testing and Rehabilitation Technology, Zhengzhou 450001, China
3Collaborative Innovation Center of Water Conservancy and Transportation Infrastructure Safety, Henan Province, Zhengzhou 450001, China

Correspondence should be addressed to Peiling Tan; moc.361@2001132571lpt

Received 23 June 2019; Revised 16 September 2019; Accepted 3 October 2019; Published 31 October 2019

Academic Editor: Emilio Turco

Copyright © 2019 Hongyuan Fang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. GJBT‐778, Buried Plastic Drainage Pipe Construction (Chinese Standard), China Planning Press, Beijing, China, 2006.
  2. A. S. Dhar and I. D. Moore, “Liner buckling in profiled polyethylene pipes,” Geosynthetics International, vol. 8, no. 4, pp. 303–326, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Zhang, Z. Liang, and G. Zhao, “Mechanical behaviour analysis of a buried steel pipeline under ground overload,” Engineering Failure Analysis, vol. 63, pp. 131–145, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Liang, Q. Yang, J. Zhang, and B. Zhu, “Mechanical analysis of buried polyethylene pipelines under ground overload,” Journal of Failure Analysis and Prevention, vol. 19, no. 1, pp. 193–203, 2019. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Zhang, Z. Liang, and C. Han, “Mechanical behaviour analysis of buried pressure pipeline crossing ground settlement zone,” International Journal of Pavement Engineering, vol. 18, no. 7, pp. 608–621, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Zhang and R. Xie, “Numerical analysis of mechanical behavior of buried pipes in subsidence area caused by underground mining,” Journal of Pressure Vessel Technology, vol. 141, no. 2, Article ID 021703, 2019. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Zhou, F. Wang, Y.-J. Du, and M. D. Liu, “Laboratory evaluation of buried high-density polyethylene pipes subjected to localized ground subsidence,” Acta Geotechnica, vol. 14, no. 4, pp. 1081–1099, 2019. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Zhang, L. Zhang, and Z. Liang, “Buckling failure of a buried pipeline subjected to ground explosions,” Process Safety and Environmental Protection, vol. 114, pp. 36–47, 2018. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Guo, C. Liu, D. Wang, and R. He, “Numerical study and safety spacing of buried parallel gas pipelines: a study based on TNT equivalent method,” International Journal of Pressure Vessels and Piping, vol. 168, pp. 246–257, 2018. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Zhang, Z. Liang, and C. Han, “Numerical simulation of pipeline deformation caused by rockfall impact,” The Scientific World Journal, vol. 2014, Article ID 161898, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Wang and D. S. Cavers, “A simplified approach for rockfall ground penetration and impact stress calculations,” Landslides, vol. 5, no. 3, pp. 305–310, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Kang, “Finite element analysis for deeply buried concrete pipes in proposed imperfect trench installations with expanded polystyrene (EPS) foams,” Engineering Structures, vol. 189, pp. 286–295, 2019. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Al-Naddaf, J. Han, C. Xu, and S. M. Rahmaninezhad, “Effect of geofoam on vertical stress distribution on buried structures subjected to static and cyclic footing loads,” Journal of Pipeline Systems Engineering and Practice, vol. 10, no. 1, Article ID 04018027, 2019. View at Publisher · View at Google Scholar · View at Scopus
  14. B. Li, H. Fang, H. He, K. Yang, C. Chen, and F. Wang, “Numerical simulation and full-scale test on dynamic response of corroded concrete pipelines under multi-field coupling,” Construction and Building Materials, vol. 200, pp. 368–386, 2019. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Fang, B. Li, F. Wang, Y. Wang, and C. Cui, “The mechanical behaviour of drainage pipeline under traffic load before and after polymer grouting trenchless repairing,” Tunnelling and Underground Space Technology, vol. 74, pp. 185–194, 2018. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Zhang, Y. Xiao, and Z. Liang, “Mechanical behaviors and failure mechanisms of buried polyethylene pipes crossing active strike-slip faults,” Composites Part B: Engineering, vol. 154, pp. 449–466, 2018. View at Publisher · View at Google Scholar · View at Scopus
  17. W. Wang, L. Wang, D. H. Ma, and J. Y. Su, “3D FEM analysis of buried pipeline affected by excavation of adjacent foundation pits under different protection measures,” Journal of Beijing University of Technology, vol. 35, no. 7, pp. 939–946, 2009. View at Google Scholar
  18. J. Zhang, R. Xie, and H. Zhang, “Mechanical response analysis of the buried pipeline due to adjacent foundation pit excavation,” Tunnelling and Underground Space Technology, vol. 78, pp. 135–145, 2018. View at Publisher · View at Google Scholar · View at Scopus
  19. R. W. I. Brachman, I. D. Moore, and S. M. Munro, “Compaction effects on strains within profiled thermoplastic pipes,” Geosynthetics International, vol. 15, no. 2, pp. 72–85, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. S. L. Gassman, A. J. Schroeder, and R. P. Ray, “Field performance of high density polyethylene culvert pipe,” Journal of Transportation Engineering, vol. 131, no. 2, pp. 160–167, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Marston and A. O. Anderson, The Theory of Loads on Pipes in Ditches: And Tests of Cement and Clay Drain Tile and Sewer Pipe, vol. 31, Iowa State College of Agriculture and Mechanic Arts, Ames, IA, USA, 1913.
  22. M. G. Spangler and G. E. Shafer, “The structural design of flexible pipe culverts,” in Proceedings of the Highway Research Board, vol. 17, Washington, DC, USA, November 1938.
  23. A. Howard, “Load-deflection field test of 27-inch (675-mm) PVC (polyvinyl chloride) pipe,” in Buried Plastic Pipe Technology, ASTM International, West Conshohocken, PA, USA, 1990. View at Google Scholar
  24. E. Faragher, C. D. F. Rogers, and P. R. Fleming, “Laboratory determination of soil stiffness data for buried plastic pipes,” Transportation Research Record: Journal of the Transportation Research Board, vol. 1624, no. 1, pp. 231–236, 1998. View at Publisher · View at Google Scholar · View at Scopus
  25. S. Sargand, T. Masada, G. Hazen, and D. Schehl, “Field verification of structural performance of thermoplastic pipe under deep backfill conditions,” Tech. Rep., NASA, Washington, DC, USA, 2002, NASA STI/Recon Technical Report N. View at Google Scholar
  26. T. J. McGrath, E. T. Selig, M. C. Webb, and G. V. Zoladz, “Pipe interaction with the backfill envelope,” Tech. Rep., FHWA, Washington, DC, USA, 1999, No. FHWA-RD-98-191. View at Google Scholar
  27. A. S. Dhar, I. D. Moore, and T. J. McGrath, “Two-dimensional analyses of thermoplastic culvert deformations and strains,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 130, no. 2, pp. 199–208, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. D. S. Al-Abri and Y. E. Mohamedzein, “Performance of plastic pipes installed in dune sand,” in Proceedings of the Pipelines 2010: Climbing New Peaks to Infrastructure Reliability-Renew, Rehab, and Reinvest, pp. 402–414, Keystone, CO, USA, August 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. F. Wang, Y. J. Du, M. Zhou, and Y. J. Zhang, “Experimental study of the effects produced by a backfilling process on full-scale buried corrugated HDPE pipes in fine-grained soils,” Journal of Pipeline Systems Engineering and Practice, vol. 7, no. 1, Article ID 05015001, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. T. J. M. McGrath, S. J. DelloRusso, and J. Boynton, “Performance of thermoplastic culvert pipe under highway vehicle loading,” in Proceedings of the Pipelines 2002: Beneath Our Feet: Challengers and Solutions, Cleveland, OH, USA, August 2002. View at Publisher · View at Google Scholar · View at Scopus
  31. M. A. Noor and A. S. Dhar, “Three-dimensional response of buried pipe under vehicle loads,” in Proceedings of the International Conference on 2003 Pipeline Engineering and Construction, vol. 1, American Society of Civil Engineers, Baltimore, MA, USA, July 2003.
  32. S. M. Tafreshi and O. Khalaj, “Analysis of repeated-load laboratory tests on buried plastic pipes in sand,” Soil Dynamics and Earthquake Engineering, vol. 31, no. 1, pp. 1–15, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. CJJ 143-2010, Technical Specification for Buried Plastic Pipeline of Sewer Engineering (Chinese Standard), China Building Industry Press, Beijing, China, 2010.
  34. T. J. McGrath, “Design method for flexible pipe,” Tech. Rep., Sinpson Gumpertz & Heger Inc., Arlington, MA, USA, 1998, A Rep. to the AASHTO Flexible Culvert Liaison Committee. View at Google Scholar
  35. R. K. Watkins, E. Szpak, and W. Allman, “Structural design of polyethylene pipes subjected to external loads,” Utah State University, Logan, UT, USA, 1974. View at Google Scholar
  36. D. Cebon, “Interaction between heavy vehicles and roads (no. 930001),” in Proceedings of the SAE Technical Paper Series, Colorado Springs, CO, USA, March 1993. View at Publisher · View at Google Scholar · View at Scopus
  37. I. D. Moore and F. Hu, “Linear viscoelastic modelling of profiled high density polyethylene pipe,” Canadian Journal of Civil Engineering, vol. 23, no. 2, pp. 395–407, 1996. View at Publisher · View at Google Scholar · View at Scopus
  38. C. D. F. Rogers, “Some observations on flexible pipe response to load,” Transportation Research Record (1191), Transportation Research Board, Washington, DC, USA, 1988. View at Google Scholar
  39. C. D. F. Rogers, P. R. Fleming, and R. Talby, “Use of visual methods to investigate influence of installation procedure on pipe-soil interaction,” Transportation Research Record: Journal of the Transportation Research Board, vol. 1541, no. 1, pp. 76–85, 1996. View at Publisher · View at Google Scholar · View at Scopus