ECC Design Based on Uniform Design Test Method and Alternating Conditional Expectation

<table class="table-group" id="tab3"><tr><td><table class="table"><tr><td class="thead-hr" colspan="6"><hr/></td></tr><tr class="thead"><td class="align_left">Diameter (<i>μ</i>m)</td><td class="align_center">Length (mm)</td><td class="align_center">Density (g·cm<sup>−3</sup>)</td><td class="align_center">Tensile strength (MPa)</td><td class="align_center">Elastic modulus (GPa)</td><td class="align_center">Elongation (%)</td></tr><tr><td class="thead-hr" colspan="6"><hr/></td></tr><tr><td class="align_left">39</td><td class="align_center">12</td><td class="align_center">1.3</td><td class="align_center">1620</td><td class="align_center">42.8</td><td class="align_center">7</td></tr><tr class="table-tr"><td colspan="6"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Material properties of PVA fiber.</div>

Mathematical Problems in Engineering

tab3

Table 3

Table 3: ECC Design Based on Uniform Design Test Method and Alternating Conditional Expectation 