Research Article
Performance Analysis of Hydrodynamic Pressure Finger Seal by Wall Slip Effect
Table 1
Structural parameters of hydrodynamic pressure finger seal.
| Parameter | Value |
| Finger seal outer diameter (mm) | 100 | Finger seal internal diameter (mm) | 66.04 | Finger beam root circle diameter (mm) | 84 | Number of finger seal beams | 48 | Rotor radius (mm) | 66 | Boot height (mm) | 0.5 | Thickness of the finger seal sheet (mm) | 0.3 | Minimum air film gap (mm) | 0.00635 | Circumferential thickness ratio of gas film | 3.15 |
|
|