Research Article
Development of High-Order Infinite Element Method for Bending Analysis of Mindlin–Reissner Plates
Table 5
Comparisons between proposed approach and ABAQUS of maximum deflection along
shown in Figure
6.
| Coordinate | Deflection (mm) | Relative deviation (%) | High-order PIEM | ABAQUS |
| −50 | 0.000 | 0.000 | 0.00 | −40 | −0.311 | −0.310 | 0.12 | −30 | −1.449 | −1.451 | 0.12 | −20 | −3.378 | −3.383 | 0.14 | −10 | −6.000 | −6.009 | 0.15 | 0 | −9.212 | −9.225 | 0.14 | 10 | −12.914 | −12.932 | 0.14 | 20 | −17.008 | −17.030 | 0.13 | 30 | −21.399 | −21.425 | 0.12 | 40 | −25.991 | −26.020 | 0.11 | 50 | −30.689 | −30.722 | 0.11 |
|
|