Research Article
Development of High-Order Infinite Element Method for Bending Analysis of Mindlin–Reissner Plates
Table 7
Comparisons between the proposed approach and ABAQUS of maximum deflection along
shown in Figure
8.
| Coordinate | Deflection (mm) | Relative deviation (%) | High-order PIEM | ABAQUS |
| −72 | 0.0000 | 0.0000 | 0.00 | −54 | 0.2883 | 0.2877 | 0.21 | −36 | 0.4813 | 0.4805 | 0.16 | −18 | 0.6029 | 0.6020 | 0.16 | 0 | 0.6388 | 0.6379 | 0.15 | 18 | 0.6029 | 0.6020 | 0.16 | 36 | 0.4813 | 0.4805 | 0.16 | 54 | 0.2883 | 0.2877 | 0.21 | 72 | 0.0000 | 0.0000 | 0.00 |
|
|