Research Article
Hydrodynamic Performance Improvement of Double-Row Floating Breakwaters by Changing the Cross-Sectional Geometry
Table 1
Main parameters of the experimental model [
24].
| Wave gauges (single-row FB) | WG1 and WG2 | 350 (cm) | WG2 and WG3 | 40 (cm) | WG3 and model | 250 (cm) | Model and WG4 | 250 (cm) | WG4 and WG5 | 40 (cm) |
| Wave gauges (double-row FBs) | WG1 and WG2 | 350 (cm) | WG2 and WG3 | 40 (cm) | WG3 and model 1 | 250 (cm) | Model 2 and WG4 | 250 (cm) | WG4 and WG5 | 40 (cm) |
| Main model parameters | Length | 760 (mm) | Width | 500 (mm) | Height | 200 (mm) | Draft | 100 (mm) | Mass | 19.1 (kg) | Roll inertia | 0.558 (kg.) | Gravity center above the bottom | 100 (mm) |
|
|