Research Article
An Improved Mathematical Model of Cutting Temperature in End Milling Al7050 Based on the Influence of Tool Geometry Parameters and Milling Parameters
Table 4
Simulation conditions and results.
| No. | xd (mm) | xr (mm) | xl (°) | xq (°) | (mm ∗ s−1) | fz (mm ∗ z−1) | ap (mm) | ae (mm) | T (°C) |
| 1 | 12 | 0.01 | 30 | 15 | 400 | 0.1 | 4 | 4 | 306.6 | 2 | 16 | 0.015 | 35 | 20 | 600 | 0.15 | 6 | 6 | 384.1 | 3 | 8 | 0.015 | 35 | 10 | 500 | 0.2 | 3 | 2 | 361.2 | 4 | 10 | 0.01 | 30 | 15 | 400 | 0.1 | 3 | 3 | 303.2 | | 18 | 0.008 | 25 | 16 | 900 | 0.08 | 6 | 2 | 331.5 |
|
|