Research Article
Optimization of CNC Milling Parameters for Complex 3D Surfaces of SIMOLD 2083 Alloy Mold Core Utilizing Multiobjective Water Cycle Algorithm
Table 5
ANOVA analysis for milling time.
| | Source | DF | Seq SS | Influence (%) | Adj SS | Adj MS | value |
| | Model | 8 | 6330.22 | 100.00 | 6330.22 | 791.28 | Remarkable | | Linear | 3 | 5861.88 | 92.60 | 3305.79 | 1101.93 | Remarkable | | S | 1 | 0.00 | 0.00 | 0.00 | 0.00 | Remarkable | | F | 1 | 5861.88 | 92.60 | 3142.36 | 3142.36 | Remarkable | | t | 1 | 0.00 | 0.00 | 0.00 | 0.00 | Remarkable | | Square | 3 | 468.12 | 7.40 | 281.22 | 93.74 | Remarkable | | SS | 1 | 0.22 | 0.00 | 0.22 | 0.22 | Remarkable | | FF | 1 | 467.68 | 7.39 | 268.56 | 268.56 | Remarkable | | t t | 1 | 0.22 | 0.00 | 0.14 | 0.14 | Remarkable | | 2-Way interaction | 2 | 0.22 | 0.00 | 0.22 | 0.11 | Remarkable | | SF | 1 | 0.08 | 0.00 | 0.00 | 0.00 | Remarkable | | St | 1 | 0.14 | 0.00 | 0.14 | 0.14 | Remarkable | | Error | 0 | — | — | — | — | | | Total | 8 | 6330.22 | 100.00 | | | |
|
|
