Research Article
[Retracted] Study of Surface Roughness of Cutting Isothermally Hardened Ductile Iron in Tosa Knife Forging Technique Based on Intelligent Calculation
Figure 3
The influence of workpiece material properties on surface roughness. (a) = 0.2 mm/r, = 0.1 mm. (b) = 0.2 mm/r, = 0.2 mm. (c) = 0.08 mm/r, = 0.2 mm. (d) = 0.08 mm/r, = 0.1 mm.
(a) |
(b) |
(c) |
(d) |