Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2007, Article ID 85150, 11 pages
http://dx.doi.org/10.1155/2007/85150
Research Article

Experimental and Theoretical Investigations of Mouldability for Feedstocks Used in Powder Injection Moulding

1Department of Mechanical Technology, Faculty of Technology, Gazi University, Ankara, Teknikokullar 06500, Turkey
2Department of Mechanical Engineering, Faculty of Engineering, Kırıkkale University, Kırıkkale, Ankara 71450, Turkey

Received 11 September 2006; Accepted 8 March 2007

Academic Editor: Agostino Bruzzone

Copyright © 2007 Çetin Karataş et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Çetin Karatas, Adnan Sözen, Erol Arcaklioglu, and Sami Erguney, “Experimental and Theoretical Investigations of Mouldability for Feedstocks Used in Powder Injection Moulding,” Modelling and Simulation in Engineering, vol. 2007, Article ID 85150, 11 pages, 2007. https://doi.org/10.1155/2007/85150.