Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2011 (2011), Article ID 358940, 8 pages
http://dx.doi.org/10.1155/2011/358940
Research Article

Numerical Computation and Investigation of the Characteristics of Microscale Synthetic Jets

1School of Mechanical & Manufacturing Engineering, University of New South Wales, Sydney, NSW 2052, Australia
2Australian Nuclear Science and Technology Organisation (ANSTO), PMB 1, Menai, NSW 2234, Australia

Received 12 December 2010; Accepted 2 February 2011

Academic Editor: Chaoqun Liu

Copyright © 2011 Ann Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • A. Lee, G.H. Yeoh, V. Timchenko, and J.A. Reizes, “Flow structure generated by two synthetic jets in a channel: Effect of phase and frequency,” Sensors and Actuators A: Physical, vol. 184, pp. 98–111, 2012. View at Publisher · View at Google Scholar
  • A. Lee, G.H. Yeoh, V. Timchenko, and J.A. Reizes, “Heat transfer enhancement in micro-channel with multiple synthetic jets,” Applied Thermal Engineering, vol. 48, pp. 275–288, 2012. View at Publisher · View at Google Scholar
  • A. Lee, V. Timchenko, G. H. Yeoh, and J. A. Reizes, “Three-dimensional modelling of fluid flow and heat transfer in micro-channels with synthetic jet,” International Journal Of Heat And Mass Transfer, vol. 55, no. 1-3, pp. 198–213, 2012. View at Publisher · View at Google Scholar
  • Reizes, Lee, Yeoh, and Timchenko, “Effect of variable properties on heat transfer in a micro-channel with a synthetic jet,” Computational Thermal Sciences, vol. 5, no. 5, pp. 369–388, 2013. View at Publisher · View at Google Scholar
  • Farzad Bazdidi-Tehrani, Mohammad Hatami, and Ahmad Abouata, “Effects of inlet and outlet boundary conditions on the flow field of synthetic jets,” Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 231, no. 2, pp. 107–118, 2017. View at Publisher · View at Google Scholar