Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2011 (2011), Article ID 469262, 17 pages
Research Article

Slicing Cuts on Food Materials Using Robotic-Controlled Razor Blade

1Department of Mechanical and Industrial Engineering, University of Minnesota, Duluth, MN 55812, USA
2Food Processing Technology Division, ATAS Lab, Georgia Tech Research Institute, Atlanta, GA 30332, USA

Received 27 May 2011; Revised 10 August 2011; Accepted 17 August 2011

Academic Editor: Xiaosheng Gao

Copyright © 2011 Debao Zhou and Gary McMurray. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Debao Zhou and Gary McMurray, “Slicing Cuts on Food Materials Using Robotic-Controlled Razor Blade,” Modelling and Simulation in Engineering, vol. 2011, Article ID 469262, 17 pages, 2011. doi:10.1155/2011/469262