Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2011, Article ID 561828, 11 pages
http://dx.doi.org/10.1155/2011/561828
Research Article

A Finite Element-Based Elastic-Plastic Model for the Contact of Rough Surfaces

Department of Mechanical Engineering and Energy Processes, Southern Illinois University Carbondale, Carbondale, Il 62901, USA

Received 24 March 2011; Revised 18 June 2011; Accepted 20 June 2011

Academic Editor: Xiaosheng Gao

Copyright © 2011 Ali Sepehri and Kambiz Farhang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Radosław Jedynak, and Marian Sułek, “Numerical and Experimental Investigation of Plastic Interaction Between Rough Surfaces,” Arabian Journal for Science and Engineering, 2014. View at Publisher · View at Google Scholar
  • Bin Zhao, Song Zhang, and Leon M. Keer, “Semi-analytical and numerical analysis of sliding asperity interaction for power-law hardening materials,” Wear, 2016. View at Publisher · View at Google Scholar
  • Juan Carlos Rojas Garnica, Jorge Bedolla Hernandez, and Dariusz Szwedowicz Wasik, “Failure by deformation in the lateral contact between sinusoidal asperities,” Advances In Mechanical Engineering, vol. 8, no. 5, 2016. View at Publisher · View at Google Scholar