Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2011, Article ID 696947, 12 pages
http://dx.doi.org/10.1155/2011/696947
Research Article

Type-2 Fuzzy Modeling for Acoustic Emission Signal in Precision Manufacturing

Department of Mechanical Engineering, Ecole Polytechnique de Montreal, CP 6079, Succursale Centre-Ville, Montreal, QC, Canada H3C 3A7

Received 17 March 2011; Revised 6 June 2011; Accepted 20 June 2011

Academic Editor: Andrzej Dzielinski

Copyright © 2011 Qun Ren et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. H. Wang and R. X. Gao, Condition Monitoring and Control for Intelligent Manufacturing, Springer Series in Advanced Manufacturing, Springer, New York, NY, USA, 2006, ISBN: 978-1-84628-268-3.
  2. K. Iwata and T. Moriwaki, “Application of acoustic emission measurement to in-process sensing of tool wear,” Annals of the CIRP, vol. 26, no. 1-2, pp. 19–23, 1977. View at Google Scholar
  3. S. Y. Liang and D. A. Dornfeld, “Tool wear detection using time series analysis of acoustic emission,” Journal of Engineering for Industry, vol. 111, no. 3, pp. 199–205, 1989. View at Google Scholar · View at Scopus
  4. H. V. Ravindra, Y. G. Srinivasa, and R. Krishnamurthy, “Acoustic emission for tool condition monitoring in metal cutting,” Wear, vol. 212, no. 1, pp. 78–84, 1997. View at Google Scholar · View at Scopus
  5. E. Emel and E. Kannatey-Asibu, “Tool failure monitoring in turning by pattern recognition analysis of AE signals,” Journal of Engineering for Industry, vol. 110, no. 2, pp. 137–145, 1988. View at Google Scholar · View at Scopus
  6. X. Li and Z. Yuan, “Tool wear monitoring with wavelet packet transform-fuzzy clustering method,” Wear, vol. 219, no. 2, pp. 145–154, 1998. View at Publisher · View at Google Scholar · View at Scopus
  7. A. K. Menon and Z. E. Boutaghou, “Time-frequency analysis of tribological systems—Part I: implementation and interpretation,” Tribology International, vol. 31, no. 9, pp. 501–510, 1998. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Heil and D. Walnut, “Continuous and discrete wavelet transforms,” SIAM Review, vol. 31, no. 4, pp. 628–666, 1989. View at Google Scholar · View at Scopus
  9. E. P. Serrano and M. A. Fabio, “Application of the wavelet transform to acoustic emission signals processing,” IEEE Transactions on Signal Processing, vol. 44, no. 5, pp. 1270–1275, 1996. View at Google Scholar · View at Scopus
  10. S. V. Kamarthi, S. R. T. Kumara, and P. H. Cohen, “Wavelet representation of acoustic emission in turning process,” Intelligent Engineering Systems Through Artificial Neural Networks, vol. 5, pp. 861–866, 1995. View at Google Scholar
  11. X. Li, “Real-time detection of the breakage of small diameter drills with wavelet transform,” International Journal of Advanced Manufacturing Technology, vol. 14, no. 8, pp. 539–543, 1998. View at Google Scholar · View at Scopus
  12. I Nur Tansel, C. Mekdeci, and C. Mclaughlin, “Detection of tool failure in end milling with wavelet transformations and neural networks (WT-NN),” International Journal of Machine Tools and Manufacture, vol. 35, no. 8, pp. 1137–1147, 1995. View at Google Scholar · View at Scopus
  13. N. Kasashima, K. Mori, G. H. Ruiz, and N. Taniguchi, “Online failure detection in face milling using discrete wavelet transform,” CIRP Annals—Manufacturing Technology, vol. 44, no. 1, pp. 483–487, 1995. View at Publisher · View at Google Scholar · View at Scopus
  14. X. Li, “A brief review: acoustic emission method for tool wear monitoring during turning,” International Journal of Machine Tools and Manufacture, vol. 42, no. 2, pp. 157–165, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Darenfed and S. M. Wu, “Polynomial learning networks for cutting tool diagnosis in machining operations,” Transactions of the Canadian Society for Mechanical Engineering, vol. 16, no. 2, pp. 147–163, 1992. View at Google Scholar · View at Scopus
  16. Y. Quan, M. Zhou, and Z. Luo, “On-line robust identification of tool-wear via multi-sensor neural-network fusion,” Engineering Applications of Artificial Intelligence, vol. 11, no. 6, pp. 717–722, 1998. View at Google Scholar · View at Scopus
  17. Q. Ren, L. Baron, and M. Balazinski, “Fuzzy identification of cutting acoustic emission with extended subtractive cluster analysis,” Nonlinear Dynamics, 2011. View at Publisher · View at Google Scholar
  18. X. Li, Y. Yao, and Z. Yuan, “On-line tool condition monitoring system with wavelet fuzzy neural network,” Journal of Intelligent Manufacturing, vol. 8, no. 4, pp. 271–276, 1997. View at Google Scholar · View at Scopus
  19. R. J. Kuo and P. H. Cohen, “Intelligent tool wear estimation system through artificial neural networks and fuzzy modeling,” Artificial Intelligence in Engineering, vol. 12, no. 3, pp. 229–242, 1998. View at Google Scholar · View at Scopus
  20. P. Lezanski, “Intelligent system for grinding wheel condition monitoring,” Journal of Materials Processing Technology, vol. 109, no. 3, pp. 258–263, 2001. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Sun, M. Rahman, Y. S. Wong, and G. S. Hong, “Multiclassification of tool wear with support vector machine by manufacturing loss consideration,” International Journal of Machine Tools and Manufacture, vol. 44, no. 11, pp. 1179–1187, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. I. Deiab, K. Assaleh, and F. Hammad, “On modeling of tool wear using sensor fusion and polynomial classifiers,” Mechanical Systems and Signal Processing, vol. 23, no. 5, pp. 1719–1729, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. L. A. Zadeh, “Fuzzy sets,” Information and Control, vol. 8, no. 3, pp. 338–353, 1965. View at Google Scholar · View at Scopus
  24. T. Takagi and M. Sugeno, “Fuzzy identification of systems and its applications to modeling and control,” IEEE Transactions on Systems, Man and Cybernetics, vol. 15, no. 1, pp. 116–132, 1985. View at Google Scholar · View at Scopus
  25. M. Sugeno and G. T. Kang, “Structure identification of fuzzy model,” Fuzzy Sets and Systems, vol. 28, no. 1, pp. 15–33, 1988. View at Google Scholar · View at Scopus
  26. T. A. Johansen and B. A. Foss, “Identification of non-linear system structure and parameters using regime decomposition,” Automatica, vol. 31, no. 2, pp. 321–326, 1995. View at Google Scholar · View at Scopus
  27. D. Füssel, P. Ballé, and R. Isermann, “Closed loop fault diagnosis based on a nonlinear process model and automatic fuzzy rule generation,” in Proceedings of the 4th Fault Detection, Supervision and Safety of Technical Processes, 1997.
  28. L. A. Zadeh, “The concept of a linguistic variable and its application to approximate reasoning-I,” Information Sciences, vol. 8, no. 3, pp. 199–249, 1975. View at Google Scholar · View at Scopus
  29. M. Mizumoto and K. Tanaka, “Fuzzy sets and type 2 under algebraic product and algebraic sum,” Fuzzy Sets and Systems, vol. 5, no. 3, pp. 277–290, 1981. View at Google Scholar · View at Scopus
  30. N. N. Karnik and J. M. Mendel, “Introduction to Type-2 fuzzy logic systems,” Technical report, University of Southern California, 1998, http://sipi.usc.edu/-Mendel/report.
  31. R. John, “Type 2 fuzzy sets: an appraisal of theory and applications,” International Journal of Uncertainty, Fuzziness and Knowlege-Based Systems, vol. 6, no. 6, pp. 563–576, 1998. View at Google Scholar · View at Scopus
  32. L. A. Zadeh, “Fuzzy logic = computing with words,” IEEE Transactions on Fuzzy Systems, vol. 4, no. 2, pp. 103–111, 1996. View at Google Scholar · View at Scopus
  33. L. A. Zadeh, “From computing with numbers to computing with words—From manipulation of measurements to manipulation of perceptions,” IEEE Transactions on Circuits and Systems, vol. 46, no. 1, pp. 105–119, 1999. View at Google Scholar · View at Scopus
  34. J. M. Mendel, Uncertain Rule-Based Fuzzy logic Systems—Introduction on New Directions, Prentice hall PTR, Upper saddle river, NJ, USA, 2001.
  35. H. Hagras, “Type-2 FLCs: a new generation of fuzzy controllers,” IEEE Computational Intelligence Magazine, vol. 2, no. 1, pp. 30–43, 2007. View at Publisher · View at Google Scholar · View at Scopus
  36. D. Wu and W. W. Tan, “A simplified type-2 fuzzy logic controller for real-time control,” ISA Transactions, vol. 45, no. 4, pp. 503–516, 2006. View at Google Scholar · View at Scopus
  37. Q. Liang and J. M. Mendel, “Introduction to type-2 TSK fuzzy logic systems,” in Proceedings of the IEEE International Fuzzy Systems Conference (FUZZ-IEEE '99), Seoul, Korea, August 1999. View at Scopus
  38. J. M. Mendel, H. Hagras, and R. I. John, “Standard background material about interval type-2 fuzzy logic systems that can be used by all authors,” http://ieee-cis.org/_files/standards.t2.win.pdf.
  39. J. M. Mendel, “Advances in type-2 fuzzy sets and systems,” Information Sciences, vol. 177, no. 1, pp. 84–110, 2007. View at Publisher · View at Google Scholar · View at Scopus
  40. R. Qun, L. Baron, and M. Balazinski, “Type-2 takagi-sugeno-kang fuzzy logic modeling using subtractive clustering,” in Proceedings of the 25th Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS '06), pp. 120–125, Montreal, Canada, June 2006. View at Publisher · View at Google Scholar · View at Scopus
  41. S. L. Chiu, “Fuzzy model identification based on cluster estimation,” Journal of Intelligent and Fuzzy Systems, vol. 2, pp. 267–278, 1994. View at Google Scholar
  42. Q. Ren, L. Baron, K. Jemelniak, and M. Balazinski, “Tool condition monitoring using the TSK fuzzy approach based on subtractive custering method,” in News Frontiers in Applied Artificial Intelligence, pp. 52–61, Springer, Berlin, Germany, 2008. View at Google Scholar
  43. Q. Ren, M. Balazinski, L. Baron, and K. Jemielniak, “TSK fuzzy modeling for tool wear condition in turning processes: an experimental study,” Engineering Applications of Artificial Intelligence, vol. 24, no. 2, pp. 260–265, 2011. View at Google Scholar
  44. Q. Ren, L. Baron, K. Jemelniak, and M. Balazinski, “Acoustic emission signal feature analysis using Type-2 fuzzy logic system,” in Proceedings of the 29th North American Fuzzy Information Processing Society Annual Conference (NAFIPS '10), pp. 1–6, Toronto, Canada, July 2010.
  45. Q. Ren, M. Balazinski, and L. Baron, “Uncertainty prediction for tool wear condition using type-2 TSK fuzzy approach,” in Proceedings of the IEEE International Conference on Systems, Man and Cybernetics (SMC '09), pp. 660–665, San Antonio, Tex, USA, October 2009. View at Publisher · View at Google Scholar · View at Scopus
  46. Q. Ren, L. Baron, and M. Balazinski, “Application of type-2 fuzzy estimation on uncertainty in machining: an approach on acoustic emission during turning process,” in Proceedings of the 28th Annual Meeting of the North American Fuzzy Information Processing Society (NAFIPS '09), Cincinnati, Ohio, USA, June 2009. View at Publisher · View at Google Scholar · View at Scopus
  47. Q. Ren, L. Baron, K. Jemelniak, and M. Balazinski, “Modelling of dynamic micromilling cutting forces using Type-2 fuzzy rule-based system,” in Proceedings of the IEEE World Congress on Computational Intelligence International Conference on Fuzzy Systems (WCCI '10), pp. 2311–2317, Barcelona, Spain, 2010.
  48. Q. Ren, M. Balazinski, and L. Baron, “Type-2 TSK fuzzy logic system and its type-1 counterpart,” International Journal of Computer Applications, vol. 20, no. 6, pp. 8–13, 2011. View at Google Scholar
  49. K. Demirli, S. X. Cheng, and P. Muthukumaran, “Subtractive clustering based modeling of job sequencing with parametric search,” Fuzzy Sets and Systems, vol. 137, no. 2, pp. 235–270, 2003. View at Publisher · View at Google Scholar · View at Scopus