Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2012, Article ID 362197, 7 pages
http://dx.doi.org/10.1155/2012/362197
Research Article

Theoretic and Experimental Studies on the Casting of Large Die-Type Parts Made of Lamellar Graphite Grey Pig Irons by Using the Technology of Polystyrene Moulds Casting from Two Sprue Cups

Department of Engineering, University “Eftimie Murgu” of Resita, Piaţa Traian Vuia, nr.1-4, 320085 Resita, Jud. Caras-Severin, Romania

Received 30 April 2012; Revised 30 August 2012; Accepted 13 September 2012

Academic Editor: Philippe Boisse

Copyright © 2012 Constantin Marta et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Constantin Marta, Ioan Ruja, Cinca Ionel Lupinca, and Monica Rosu, “Theoretic and Experimental Studies on the Casting of Large Die-Type Parts Made of Lamellar Graphite Grey Pig Irons by Using the Technology of Polystyrene Moulds Casting from Two Sprue Cups,” Modelling and Simulation in Engineering, vol. 2012, Article ID 362197, 7 pages, 2012. https://doi.org/10.1155/2012/362197.