Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2014 (2014), Article ID 292647, 7 pages
http://dx.doi.org/10.1155/2014/292647
Research Article

Modeling Large Deformation and Failure of Expanded Polystyrene Crushable Foam Using LS-DYNA

Department of Mechanical Engineering, Faculty of Engineering, International Islamic University Malaysia, 53100 Jalan Gombak, Kuala Lumpur, Malaysia

Received 31 May 2013; Accepted 31 October 2013; Published 27 January 2014

Academic Editor: Dimitrios E. Manolakos

Copyright © 2014 Qasim H. Shah and A. Topa. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Qasim H. Shah and A. Topa, “Modeling Large Deformation and Failure of Expanded Polystyrene Crushable Foam Using LS-DYNA,” Modelling and Simulation in Engineering, vol. 2014, Article ID 292647, 7 pages, 2014. doi:10.1155/2014/292647