Research Article
Dynamic Modeling and Simulation of a Thermoelectric-Solar Hybrid Energy System Using an Inverse Dynamic Analysis Input Shaper
Table 1
Specification of TEM (TEP1-12656-0.6).
| | Specifications | Values |
| | Hot side temperature (°C) | 300 | | Cold side temperature (°C) | 30 | | Open circuit voltage (V) | 8.4 | | Matched load resistance () | 1.2 | | Matched load output voltage (V) | 4.2 | | Matched load output current (A) | 3.4 | | Matched load output power (W) | 14.6 | | Heat flow across the module (W) | ≈365 | | Heat flow density (W cm−2) | ≈11.6 | | AC resistance measured at 27°C and 1000 Hz () | 0.5–0.7 |
|
|
