Table of Contents Author Guidelines Submit a Manuscript
Modelling and Simulation in Engineering
Volume 2014 (2014), Article ID 760934, 8 pages
http://dx.doi.org/10.1155/2014/760934
Research Article

Wind Turbine Placement Optimization by means of the Monte Carlo Simulation Method

1Department of Electronic Engineering, Chemistry and Industrial Engineering, University of Messina, Contrada di Dio, 98166 Messina, Italy
2Department of Industrial Engineering, University of Catania, Viale A. Doria 6, 9125 Catania, Italy

Received 9 January 2014; Accepted 15 May 2014; Published 9 June 2014

Academic Editor: Mohamed B. Trabia

Copyright © 2014 S. Brusca et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

S. Brusca, R. Lanzafame, and M. Messina, “Wind Turbine Placement Optimization by means of the Monte Carlo Simulation Method,” Modelling and Simulation in Engineering, vol. 2014, Article ID 760934, 8 pages, 2014. doi:10.1155/2014/760934