Measurements of Tool Wear Parameters Using Machine Vision System

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Workpiece outer diameter</td><td class="align_center">240 mm</td></tr><tr><td class="align_left">Workpiece inside diameter</td><td class="align_center">97 mm</td></tr><tr><td class="align_left">Spindle speed</td><td class="align_center">300 rpm</td></tr><tr><td class="align_left">Feed rate</td><td class="align_center">0.3 mm/revolution</td></tr><tr><td class="align_left">Depth of cut</td><td class="align_center">2 mm</td></tr><tr><td class="align_left">Machining duration</td><td class="align_center">5 minutes</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Details of the machining parameters.</div>

Modelling and Simulation in Engineering

tab1

Table 1

Table 1: Measurements of Tool Wear Parameters Using Machine Vision System 