Research Article
Measurements of Tool Wear Parameters Using Machine Vision System
Table 4
Measured parameters of the tool wear with the vision system.
| Insert number | Average tool wear width (mm) | Tool wear area (mm2) | Tool wear perimeter (mm) |
| 1 | 5 | ā | ā | 2 | 10 | 0.169 | 0.160 | 3 | 15 | 0.108 | 0.126 | 4 | 20 | 0.155 | 0.170 | 5 | 25 | 0.183 | 0.178 | 6 | 30 | 0.206 | 0.198 | 7 | 35 | 0.208 | 0.194 | 8 | 40 | 0.278 | 0.322 | 9 | 45 | 0.286 | 0.327 | 10 | 50 | 0.290 | 0.331 | 11 | 55 | 0.460 | 0.589 | 12 | 60 | 0.506 | 0.644 |
|
|