Research Article
Finite Element and Multibody Dynamics Analysis of a Ball Mill Glass Crusher
| Item no. | Part name | Qty |
| 1 | Motor frame new | 1 | 2 | Middle frame support | 3 | 3 | Inlet frame new | 1 | 4 | Middle support | 2 | 5 | New fixed container | 1 | 6 | UCP—308 bearing 40 mm | 1 | 7 | Inlet bearing on base | 1 | 8 | Test shaft | 8 | 9 | AFBMA 20.1-23-20-8, SI, NC, 8_68 | 8 | 10 | Wall motor shaft | 1 | 11 | Wall inlet shaft | 1 | 12 | Inlet bearing top side | 1 | 13 | Updated outer wall motor side | 1 | 14 | Updated outer wall inlet side | 1 | 15 | Updated Drum | 1 | 16 | Hinge1 | 6 | 17 | Hinge2 | 6 | 18 | Updated door | 2 | 19 | Container cone | 1 | 20 | Table sheet | 1 | 21 | Motor stand | 1 | 22 | Electric motor | 1 | 23 | Motor shaft | 1 | 24 | Motor pulley | 1 | 25 | Drum pulley | 1 | 26 | Belt 1–3 | 1 | 27 | Door brush | 4 | 28 | Container brush | 2 |
|
|