Modelling and Simulation in Engineering

Table of Contents: 2011

  • Modelling and Simulation in Engineering -
  • Special Issue
  • Volume 2011
  • - Article ID 903721
  • - Research Article

Computer-Aided Design, Modeling and Simulation of a New Solar Still Design

Jeremy (Zheng) Li
  • Modelling and Simulation in Engineering -
  • Special Issue
  • Volume 2011
  • - Article ID 414286
  • - Research Article

Performances Comparison for a Rotating Shaft Suspended by 4-Axis Radial Active Magnetic Bearings via -Synthesis, Loop-Shaping Design, and Sub with Uncertainties

G. Barbaraci | G. Virzi' Mariotti
  • Modelling and Simulation in Engineering -
  • Special Issue
  • Volume 2011
  • - Article ID 289523
  • - Research Article

Simulation of Cerebral Aneurysm Growth and Prediction of Evolving Rupture Risk

Martin Kroon
  • Modelling and Simulation in Engineering -
  • Special Issue
  • Volume 2011
  • - Article ID 591905
  • - Research Article

Modelling and Predicting the Breaking Strength and Mass Irregularity of Cotton Rotor-Spun Yarns Containing Cotton Fiber Recovered from Ginning Process by Using Artificial Neural Network Algorithm

Mohsen Shanbeh | Hossein Hasani | Somayeh Akhavan Tabatabaei
  • Modelling and Simulation in Engineering -
  • Special Issue
  • Volume 2011
  • - Article ID 210628
  • - Research Article

Alleviating the Collision States and Fleet Optimization by Introducing a New Generation of Automated Guided Vehicle Systems

Parham Azimi
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 941870
  • - Research Article

New Evaluation Technique for WTG Design Wind Speed Using a CFD-Model-Based Unsteady Flow Simulation with Wind Direction Changes

Takanori Uchida | Takashi Maruyama | Yuji Ohya
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 293078
  • - Research Article

Aerodynamic Optimization of an Over-the-Wing-Nacelle-Mount Configuration

Daisuke Sasaki | Kazuhiro Nakahashi
  • Modelling and Simulation in Engineering -
  • Special Issue
  • Volume 2011
  • - Article ID 696275
  • - Review Article

Application of ANN in Milling Process: A Review

Salah Al-Zubaidi | Jaharah A. Ghani | Che Hassan Che Haron
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 259401
  • - Research Article

Investigation of Swirling Flows in Mixing Chambers

Jyh Jian Chen | Chun Huei Chen
  • Modelling and Simulation in Engineering -
  • Special Issue
  • Volume 2011
  • - Article ID 603632
  • - Research Article

Stability of the Supply Chain Using System Dynamics Simulation and the Accumulated Deviations from Equilibrium

Luis Rabelo | Alfonso T. Sarmiento | Albert Jones
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 358940
  • - Research Article

Numerical Computation and Investigation of the Characteristics of Microscale Synthetic Jets

Ann Lee | Guan H. Yeoh | ... | John Reizes
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 146054
  • - Research Article

Experimental and Numerical Simulations Predictions Comparison of Power and Efficiency in Hydraulic Turbine

Laura Castro | Gustavo Urquiza | ... | Marcelo Reggio
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 749421
  • - Research Article

Comparisons between the Wake of a Wind Turbine Generator Operated at Optimal Tip Speed Ratio and the Wake of a Stationary Disk

Takanori Uchida | Yuji Ohya | Kenichiro Sugitani
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 837921
  • - Research Article

CFD-Guided Development of Test Rigs for Studying Erosion and Large-Particle Damage of Thermal Barrier Coatings

Maria A. Kuczmarski | Robert A. Miller | Dongming Zhu
  • Modelling and Simulation in Engineering -
  • Special Issue
  • - Volume 2011
  • - Article ID 274947
  • - Research Article

Computation of Ice Shedding Trajectories Using Cartesian Grids, Penalization, and Level Sets

Héloïse Beaugendre | François Morency | ... | Sophie Laurens
Modelling and Simulation in Engineering
 Journal metrics
See full report
Acceptance rate10%
Submission to final decision84 days
Acceptance to publication21 days
CiteScore3.000
Journal Citation Indicator0.530
Impact Factor3.2
 Submit Evaluate your manuscript with the free Manuscript Language Checker

We have begun to integrate the 200+ Hindawi journals into Wiley’s journal portfolio. You can find out more about how this benefits our journal communities on our FAQ.