Research Article
Comparison of Acceptable Noise Level Generated Using Different Transducers and Response Modes
Table 2
The paired t-tests for MCL, BNL, and ANL obtained from the three measurements in different methods. The significance level was set at
.
| Values | Method | 1st versus 2nd measurement | 1st versus 3rd measurement | 2nd versus 3rd measurement | | value | | value | | value |
| MCL (dB HL) | LS | −1.488 | 0.153 | −1.510 | 0.148 | −0.261 | 0.797 | LA | −0.469 | 0.645 | 1.070 | 0.298 | 1.889 | 0.074 | ES | −0.553 | 0.587 | −1.594 | 0.127 | −1.730 | 0.100 | EA | −0.469 | 0.645 | 1.070 | 0.298 | 1.889 | 0.074 |
| BNL (dB HL) | LS | −1.616 | 0.122 | −2.236 | 0.038 | −1.917 | 0.070 | LA | −0.592 | 0.561 | −1.291 | 0.212 | −1.301 | 0.209 | ES | −0.785 | 0.442 | −1.724 | 0.101 | −1.875 | 0.076 | EA | −1.453 | 0.163 | 0.000 | 1.000 | 1.759 | 0.095 |
| ANL (dB) | LS | 0.773 | 0.449 | 2.698 | 0.014 | 1.437 | 0.167 | LA | 1.045 | 0.309 | 1.506 | 0.148 | 0.825 | 0.419 | ES | 0.815 | 0.425 | 0.941 | 0.358 | 0.335 | 0.741 | EA | 2.604 | 0.017 | 2.517 | 0.021 | −0.252 | 0.804 |
|
|
Values were significantly different from each other. |