Table of Contents Author Guidelines Submit a Manuscript
Scanning
Volume 2017 (2017), Article ID 2189614, 4 pages
https://doi.org/10.1155/2017/2189614
Research Article

Characterization of Surface Modification of 347 Stainless Steel upon Shot Peening

1School of Metallurgy and Materials Engineering, Chongqing University of Science & Technology, Chongqing 401331, China
2The Center of Material Analysis and Testing, Chongqing University of Science & Technology, Chongqing 401331, China
3School of Nano & Advanced Materials Engineering, Changwon National University, Changwon 51140, Republic of Korea

Correspondence should be addressed to Kejian Li

Received 24 July 2017; Revised 8 October 2017; Accepted 24 October 2017; Published 12 December 2017

Academic Editor: Guosong Wu

Copyright © 2017 Kejian Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Kejian Li, Qiang Zheng, Chunhong Li, et al., “Characterization of Surface Modification of 347 Stainless Steel upon Shot Peening,” Scanning, vol. 2017, Article ID 2189614, 4 pages, 2017. doi:10.1155/2017/2189614