Table of Contents Author Guidelines Submit a Manuscript
Scanning
Volume 2017 (2017), Article ID 6243179, 10 pages
https://doi.org/10.1155/2017/6243179
Research Article

The Effect of Various Types of Mechanical and Chemical Preconditioning on the Shear Bond Strength of Orthodontic Brackets on Zirconia Restorations

1Department of Pediatric Dentistry, Wonju Severance Christian Hospital, Wonju College of Medicine, Yonsei University, Wonju, Republic of Korea
2Department of Orthodontics, Wonju Severance Christian Hospital, Wonju College of Medicine, Yonsei University, Wonju, Republic of Korea
3Department of Conservative Dentistry, Wonju Severance Christian Hospital, Wonju College of Medicine, Yonsei University, Wonju, Republic of Korea

Correspondence should be addressed to Yoon Lee; rk.ca.iesnoy@eelnooy

Received 17 August 2016; Revised 18 October 2016; Accepted 23 October 2016; Published 11 January 2017

Academic Editor: Daniele Passeri

Copyright © 2017 Jihun Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Ishida, K. Fujimoto, N. Higaki, T. Goto, and T. Ichikawa, “End points and assessments in esthetic dental treatment,” Journal of Prosthodontic Research, vol. 59, no. 4, pp. 229–235, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. S. B. Sangappa and A. V. Mehendale, “Instructional design for assessment of dental esthetic treatment needs in a Indian undergraduate school: a randomised controlled trial,” Journal of Indian Prosthodontist Society, vol. 14, pp. 137–143, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. D. M. Holsinger, M. H. Wells, M. Scarbecz, and M. Donaldson, “Clinical evaluation and parental satisfaction with pediatric zirconia anterior crowns,” Pediatric Dentistry, vol. 38, no. 3, pp. 192–197, 2016. View at Google Scholar
  4. E. S. Gosnell and S. Thikkurissy, “Management of dental caries and esthetic issues in the pediatric patient,” Journal of the California Dental Association, vol. 41, no. 8, pp. 619–629, 2013. View at Google Scholar · View at Scopus
  5. M. Özcan and M. Bernasconi, “Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis,” The Journal of Adhesive Dentistry, vol. 17, no. 1, pp. 7–26, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. J. I. Lopez, “Retentive shear strengths of various bonding attachment bases,” American Journal of Orthodontics, vol. 77, no. 6, pp. 669–678, 1980. View at Publisher · View at Google Scholar · View at Scopus
  7. M. F. McCarthy and S. O. Hondrum, “Mechanical and bond strength properties of light-cured and chemically cured glass ionomer cements,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 105, no. 2, pp. 135–141, 1994. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Christel, A. Meunier, M. Heller, J. P. Torre, and C. N. Peille, “Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia,” Journal of Biomedical Materials Research, vol. 23, no. 1, pp. 45–61, 1989. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Piconi and G. Maccauro, “Zirconia as a ceramic biomaterial,” Biomaterials, vol. 20, no. 1, pp. 1–25, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. E. Papia, C. Larsson, M. Du Toit, and P. V. Von Steyern, “Bonding between oxide ceramics and adhesive cement systems: a systematic review,” Journal of Biomedical Materials Research—Part B Applied Biomaterials, vol. 102, no. 2, pp. 395–413, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Della Bona and K. J. Anusavice, “Microstructure, composition, and etching topography of dental ceramics,” International Journal of Prosthodontics, vol. 15, no. 2, pp. 159–167, 2002. View at Google Scholar · View at Scopus
  12. S. S. Atsu, M. A. Kilicarslan, H. C. Kucukesmen, and P. S. Aka, “Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin,” Journal of Prosthetic Dentistry, vol. 95, no. 6, pp. 430–436, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. M. B. Blatz, A. Sadan, J. Martin, and B. Lang, “In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling,” Journal of Prosthetic Dentistry, vol. 91, no. 4, pp. 356–362, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. M. B. Blatz, G. Chiche, S. Holst, and A. Sadan, “Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia,” Quintessence International, vol. 38, no. 9, pp. 745–753, 2007. View at Google Scholar · View at Scopus
  15. D. Fukegawa, S. Hayakawa, Y. Yoshida, K. Suzuki, A. Osaka, and B. Van Meerbeek, “Chemical interaction of phosphoric acid ester with hydroxyapatite,” Journal of Dental Research, vol. 85, no. 10, pp. 941–944, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Pröbster and S. Kourtis, “Surface morphology of alloys treated with the Rocatec system,” Deutsche Zahnarztliche Zeitschrift, vol. 46, no. 2, pp. 135–139, 1991. View at Google Scholar · View at Scopus
  17. C. Robin, S. S. Scherrer, H. W. A. Wiskott, W. G. De Rijk, and U. C. Belser, “Weibull parameters of composite resin bond strengths to porcelain and noble alloy using the Rocatec system,” Dental Materials, vol. 18, no. 5, pp. 389–395, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. V. Ehlers, G. Kampf, E. Stender, B. Willershausen, and C.-P. Ernst, “Effect of thermocycling with or without 1 year of water storage on retentive strengths of luting cements for zirconia crowns,” Journal of Prosthetic Dentistry, vol. 113, no. 6, pp. 609–615, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. M. N. Aboushelib, “Evaluation of zirconia/resin bond strength and interface quality using a new technique,” The Journal of Adhesive Dentistry, vol. 13, no. 3, pp. 255–260, 2011. View at Google Scholar · View at Scopus
  20. R. Shahin and M. Kern, “Effect of air-abrasion on the retention of zirconia ceramic crowns luted with different cements before and after artificial aging,” Dental Materials, vol. 26, no. 9, pp. 922–928, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. J.-H. Lee, M. Lee, K.-N. Kim, and C.-J. Hwang, “Resin bonding of metal brackets to glazed zirconia with a porcelain primer,” Korean Journal of Orthodontics, vol. 45, no. 6, pp. 299–307, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. J.-Y. Lee, J.-S. Kim, and C.-J. Hwang, “Comparison of shear bond strength of orthodontic brackets using various zirconia primers,” Korean Journal of Orthodontics, vol. 45, no. 4, pp. 164–170, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Årtun and S. Bergland, “Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment,” American Journal of Orthodontics, vol. 85, no. 4, pp. 333–340, 1984. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Attia, “Bond strength of three luting agents to zirconia ceramic—influence of surface treatment and thermocycling,” Journal of Applied Oral Science, vol. 19, no. 4, pp. 388–395, 2011. View at Google Scholar · View at Scopus
  25. H. Lüthy, O. Loeffel, and C. H. F. Hammerle, “Effect of thermocycling on bond strength of luting cements to zirconia ceramic,” Dental Materials, vol. 22, no. 2, pp. 195–200, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. L. G. May, S. P. Passos, D. B. Capelli, M. Özcan, M. A. Bottino, and L. F. Valandro, “Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic,” Journal of Biomedical Materials Research—Part B Applied Biomaterials, vol. 95, no. 1, pp. 69–74, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. Lee, J.-H. Kim, J.-S. Woo, Y.-A. Yi, J.-Y. Hwang, and D.-G. Seo, “Analysis of self-adhesive resin cement microshear bond strength on leucite-reinforced glass-ceramic with/without Pure Silane Primer or Universal Adhesive Surface Treatment,” BioMed Research International, vol. 2015, Article ID 361893, 6 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  28. M. B. Blatz, M. Bergler, F. Ozer, S. Holst, J.-H. O. Phark, and G. J. Chiche, “Bond strength of different veneering ceramics to zirconia and their susceptibility to thermocycling,” American Journal of Dentistry, vol. 23, no. 4, pp. 213–216, 2010. View at Google Scholar · View at Scopus
  29. A. L. Gomes, J. C. Ramos, S. Santos-del Riego, J. Montero, and A. Albaladejo, “Thermocycling effect on microshear bond strength to zirconia ceramic using Er:YAG and tribochemical silica coating as surface conditioning,” Lasers in Medical Science, vol. 30, no. 2, pp. 787–795, 2015. View at Publisher · View at Google Scholar · View at Scopus
  30. F. Komine, K. Kobayashi, A. Saito, R. Fushiki, H. Koizumi, and H. Matsumura, “Shear bond strength between an indirect composite veneering material and zirconia ceramics after thermocycling,” Journal of Oral Science, vol. 51, no. 4, pp. 629–634, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. K. J. Anusavice and R. W. Phillips, Phillips' Science of Dental Materials, Saunders, St. Louis, Mo, USA, 2003.
  32. J.-S. Ahn, Y.-A. Yi, Y. Lee, and D.-G. Seo, “Shear bond strength of MDP-containing self-adhesive resin cement and Y-TZP ceramics: effect of phosphate monomer-containing primers,” BioMed Research International, vol. 2015, Article ID 389234, 6 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  33. K. J. Rossomando and S. L. Wendt Jr., “Thermocycling and dwell times in microleakage evaluation for bonded restorations,” Dental Materials, vol. 11, no. 1, pp. 47–51, 1995. View at Publisher · View at Google Scholar · View at Scopus
  34. S. M. Wegner, W. Gerdes, and M. Kern, “Effect of different artificial aging conditions on ceramic-composite bond strength,” International Journal of Prosthodontics, vol. 15, no. 3, pp. 267–272, 2002. View at Google Scholar · View at Scopus