Research Article
Parametric Optimization of Laser Additive Manufacturing of Inconel 625 Using Taguchi Method and Grey Relational Analysis
Table 6
Significance of factors for surface roughness and width error.
| Response factor | Factors | Mean S/N ratio | Range | Rank | Level 1 | Level 2 | Level 3 |
| Surface roughness () | LP | 13.432 | 16.645 | 15.124 | 3.213 | 2 | SS | 14.676 | 15.281 | 15.244 | 0.605 | 4 | PFR | 16.014 | 13.940 | 15.247 | 2.074 | 3 | OR | 17.176 | 15.694 | 12.331 | 4.845 | 1 |
| Width error () | LP | 20.064 | 19.357 | 17.842 | 2.222 | 3 | SS | 19.850 | 15.968 | 21.445 | 5.477 | 2 | PFR | 19.938 | 18.755 | 18.569 | 1.369 | 4 | OR | 25.667 | 16.423 | 15.173 | 10.494 | 1 |
|
|