Table of Contents Author Guidelines Submit a Manuscript
Scientific Programming
Volume 2017, Article ID 7594763, 11 pages
https://doi.org/10.1155/2017/7594763
Research Article

Development of a Wearable Device for Motion Capturing Based on Magnetic and Inertial Measurement Units

State Key Lab of Intelligent Technology and Systems, Tsinghua National Laboratory for Information Science and Technology, Department of Computer Science and Technology, Tsinghua University, Haidian District, Beijing 100083, China

Correspondence should be addressed to Bin Fang; moc.361@0211nibgnaf

Received 22 July 2016; Revised 26 September 2016; Accepted 17 October 2016; Published 18 January 2017

Academic Editor: Michele Risi

Copyright © 2017 Bin Fang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B.-S. Lin, I.-J. Lee, P.-C. Hsiao, S.-Y. Yang, and W. Chou, “Data glove embedded with 6-DOF inertial sensors for hand rehabilitation,” in Proceedings of the 10th International Conference on Intelligent Information Hiding and Multimedia Signal Processing (IIH-MSP '14), pp. 25–28, Kitakyushu, Japan, August 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. J. M. Palacios, C. Sagués, E. Montijano, and S. Llorente, “Human-computer interaction based on hand gestures using RGB-D sensors,” Sensors, vol. 13, no. 9, pp. 11842–11860, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. S. S. Rautaray and A. Agrawal, “Vision based hand gesture recognition for human computer interaction: a survey,” Artificial Intelligence Review, vol. 43, no. 1, pp. 1–54, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. E. A. Arkenbout, J. C. F. de Winter, and P. Breedveld, “Robust hand motion tracking through data fusion of 5dt data glove and nimble VR kinect camera measurements,” Sensors, vol. 15, no. 12, pp. 31644–31671, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Regazzoni, G. De Vecchi, and C. Rizzi, “RGB cams vs RGB-D sensors: low cost motion capture technologies performances and limitations,” Journal of Manufacturing Systems, vol. 33, no. 4, pp. 719–728, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Li, X. Chen, X. Zhang, K. Wang, and Z. J. Wang, “A sign-component-based framework for Chinese sign language recognition using accelerometer and sEMG data,” IEEE Transactions on Biomedical Engineering, vol. 59, no. 10, pp. 2695–2704, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Dipietro, A. M. Sabatini, and P. Dario, “A survey of glove-based systems and their applications,” IEEE Transactions on Systems, Man and Cybernetics Part C: Applications and Reviews, vol. 38, no. 4, pp. 461–482, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. B. Takacs, “How and why affordable virtual reality shapes the future of education,” The International Journal of Virtual Reality, vol. 7, no. 1, pp. 53–66, 2008. View at Google Scholar
  9. G. Saggio, “A novel array of flex sensors for a goniometric glove,” Sensors and Actuators, A: Physical, vol. 205, pp. 119–125, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. R. Gentner and J. Classen, “Development and evaluation of a low-cost sensor glove for assessment of human finger movements in neurophysiological settings,” Journal of Neuroscience Methods, vol. 178, no. 1, pp. 138–147, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. X. L. Wang and C. L. Yang, “Constructing gyro-free inertial measurement unit from dual accelerometers for gesture detection,” Sensors & Transducers, vol. 171, no. 5, pp. 134–140, 2014. View at Google Scholar · View at Scopus
  12. W. Chou, B. Fang, L. Ding, X. Ma, and X. Guo, “Two-step optimal filter design for the low-cost attitude and heading reference systems,” IET Science, Measurement and Technology, vol. 7, no. 4, pp. 240–248, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. D. Roetenberg, H. J. Luinge, C. T. M. Baten, and P. H. Veltink, “Compensation of magnetic disturbances improves inertial and magnetic sensing of human body segment orientation,” IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 13, no. 3, pp. 395–405, 2005. View at Publisher · View at Google Scholar · View at Scopus
  14. J. M. Lambrecht and R. F. Kirsch, “Miniature low-power inertial sensors: promising technology for implantable motion capture systems,” IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 22, no. 6, pp. 1138–1147, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Xu, S. L. Zhou, and W. J. Li, “MEMS accelerometer based nonspecific-user hand gesture recognition,” IEEE Sensors Journal, vol. 12, no. 5, pp. 1166–1173, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Morganti, L. Angelini, A. Adami, D. Lalanne, L. Lorenzelli, and E. Mugellini, “A smart watch with embedded sensors to recognize objects, grasps and forearm gestures,” Procedia Engineering, vol. 41, pp. 1169–1175, 2012. View at Publisher · View at Google Scholar
  17. J.-H. Kim, N. D. Thang, and T.-S. Kim, “3-D hand motion tracking and gesture recognition using a data glove,” in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE '09), pp. 1013–1018, IEEE, Seoul, South Korea, July 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. B.-S. Lin, I.-J. Lee, P.-C. Hsiao, S.-Y. Yang, and W. Chou, “Data glove embedded with 6-DOF inertial sensors for hand rehabilitation,” in Proceedings of the 10th International Conference on Intelligent Information Hiding and Multimedia Signal Processing (IIH-MSP '14), vol. 10, pp. 25–28, Kitakyushu, Japan, August 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Cavallo, D. Esposito, E. Rovini et al., “Preliminary evaluation of SensHand V1 in assessing motor skills performance in Parkinson disease,” in Proceedings of the 2013 IEEE 13th International Conference on Rehabilitation Robotics (ICORR '13), pp. 1–6, Seattle, Wash, USA, June 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. H. G. Kortier, V. I. Sluiter, D. Roetenberg, and P. H. Veltink, “Assessment of hand kinematics using inertial and magnetic sensors,” Journal of NeuroEngineering and Rehabilitation, vol. 11, no. 1, article 70, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Xu, Y. Wang, Y. Su, and X. Zhu, “Research on the calibration method of micro inertial measurement unit for engineering application,” Journal of Sensors, vol. 2016, Article ID 9108197, 11 pages, 2016. View at Publisher · View at Google Scholar
  22. J. Keighobadi, “Fuzzy calibration of a magnetic compass for vehicular applications,” Mechanical Systems and Signal Processing, vol. 25, no. 6, pp. 1973–1987, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. X. Yun and E. R. Bachmann, “Design, implementation, and experimental results of a quaternion-based Kalman filter for human body motion tracking,” IEEE Transactions on Robotics, vol. 22, no. 6, pp. 1216–1227, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. Xsens Technologies, http://www.xsens.com/.
  25. T. Hamel and R. Mahony, “Attitude estimation on SO(3) based on direct inertial measurements,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '06), pp. 2170–2175, Orlando, Fla, USA, May 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Bonnabel, P. Martin, and P. Rouchon, “Non-linear symmetry-preserving observers on Lie groups,” IEEE Transactions on Automatic Control, vol. 54, no. 7, pp. 1709–1713, 2009. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  27. InvenSense, MPU-9250 Nine-Axis MEMS MotionTracking Device, 2015, http://www.invensense.com/-products/motion -tracking/9-axis/mpu-9250/.
  28. M. Chen, S. Gonzalez, A. Vasilakos, H. Cao, and V. C. M. Leung, “Body area networks: a survey,” Mobile Networks and Applications, vol. 16, no. 2, pp. 171–193, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. MIT Media Lab, MIThril Hardware Platform, 2015, http://www.media.mit.edu/wearables/mithril/hardware/index.html.
  30. S. Salehi, G. Bleser, N. Schmitz, and D. Stricker, “A low-cost and light-weight motion tracking suit,” in Proceedings of the IEEE 10th International Conference on Ubiquitous Intelligence and Computing and IEEE 10th International Conference on Autonomic and Trusted Computing (UIC/ATC '13), December 2013. View at Publisher · View at Google Scholar
  31. J. Fang, H. Sun, J. Cao, X. Zhang, and Y. Tao, “A novel calibration method of magnetic compass based on ellipsoid fitting,” IEEE Transactions on Instrumentation and Measurement, vol. 60, no. 6, pp. 2053–2061, 2011. View at Publisher · View at Google Scholar · View at Scopus