Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2008 (2008), Article ID 681847, 8 pages
http://dx.doi.org/10.1155/2008/681847
Research Article

Decay Heat Removal and Transient Analysis in Accidental Conditions in the EFIT Reactor

1 Dipartimento Fusione, Tecnologie e Presidio Nucleari, ENEA Centro Ricerche “Ezio Clementel,” Via Martiri di Monte Sole, 4, 40129 Bologna, Italy
2Dipartimento di Ingegneria Nucleare, Università degli Studi di Palermo, Viale delle Scienze-Parco d'Orleans, 90128 Palermo, Italy

Received 10 March 2008; Revised 14 July 2008; Accepted 8 August 2008

Academic Editor: Ivo Kljenak

Copyright © 2008 Giacomino Bandini et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. U. Knebel, H. A. Abderrahim, L. Cinotti et al., “European research programme for the transmutation of high level nuclear waste in an accelerator driven system (EUROTRANS),” in Proceedings of the 9th International Exchange Meeting on Partitioning & Transmutation, pp. 1–21, Nîmes, France, September 2006.
  2. L. Cinotti, “Engineering solutions and thermal-hydraulic issues for a promising safe ADS system,” in Proceedings of the 6th International Conference on Nuclear Thermal Hydraulics, Operations and Safety (NUTHOS '04), pp. 1–18, October 2004, Nara, Japan.
  3. H. Yamano, S. Fujita, Y. Tobita et al., “SIMMER-III: a computer program for LMFR core disruptive accident analysis,” Tech. Rep. JNC TN9400 2003-071, Japan Nuclear Cycle Development Institute, Ibaraki, Japan, August 2003. View at Google Scholar
  4. S. M. Sloan, R. R. Schultz, and G. E. Wilson, “RELAP5/MOD3 code manual,” Tech. Rep. NUREG/CR-5535, INEL-95/0174, Nuclear Regulatory Commission, Washington, DC, USA, June 1995. View at Google Scholar
  5. F. Bianchi, S. Bocci, G. Forasassi et al., “Implementation and preliminary verification of the RELAP5/PARCS code for Pb-Bi cooled subcritical system,” in Proceedings of the International Conference on Accelerator Applications (AccApp '01), Reno, Nev, USA, November 2001.
  6. M. Casamirra, F. Castiglia, M. Giardina, and P. Meloni, “RELAP5 modification for CHEOPE simulations,” in Proceedings of the International Conference on Nuclear Energy for New Europe, Bled, Slovenia, September 2005.
  7. F. Bianchi, P. Meloni, and F. Mattioda, “Accident analysis of an experimental accelerator driven system,” in Proceedings of the 13th International Conference on Nuclear Engineering (ICONE-13), Bejing, China, May 2005.
  8. W. Ambrosini, N. Forgione, F. Oriolo et al., “Natural circulation of lead-bismuth in a one-dimensional loop: experiments and code predictions,” in Proceedings of the 10th International Conference on Nuclear Engineering (ICONE-10), vol. 2, pp. 755–761, Arlington, Va, USA, April 2002.
  9. P. Meloni, A. D. Wagner, F. Castiglia, M. Casamirra, P. Agostini, and G. Bertacci, “Investigation of RELAP capability to simulate the LBE cooling system thermal-hydraulic,” in Proceedings of the 8th Information Exchange Meeting on Actinide and Fission Product Partitioning & Transmutation, pp. 637–647, Las Vegas, Nev, USA, November 2004.