Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2009 (2009), Article ID 643950, 2 pages
http://dx.doi.org/10.1155/2009/643950
Editorial

Passive Safety Systems in Advanced PWRs

1Shanghai Jiao Tong University, Shanghai, China
2Department of Mechanics, Nuclear and Production Engineering (DIMNP), University of Pisa, Italy
3San Piero a Grado Research Group (GRNSPG), Department of Mechanics, Nuclear and Production Engineering (DIMNP), University of Pisa, Pisa, Italy

Received 31 December 2009; Accepted 31 December 2009

Copyright © 2009 Xu Cheng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Cheng, Y. H. Yang, Y. Ouyang, and H. X. Miao, “Role of passive safety systems in Chinese nuclear power development,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 573026, 7 pages, 2009. View at Publisher · View at Google Scholar
  2. M. Carelli, L. Conway, M. Dzodzo et al., “The SPES3 experimental facility design for the IRIS reactor simulation,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 579430, 12 pages, 2009. View at Publisher · View at Google Scholar
  3. W. Reactors, W. Ambrosini, M. Bucci, N. Forgione, A. Manfredini, and F. Oriolo, “Experiments and modelling techniques for heat and mass transfer in light,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 738480, 11 pages, 2009. View at Google Scholar
  4. J. Gou, S. Qiu, G. Su, and D. Jia, “Thermal hydraulic analysis of a passive residual heat removal system for an integral pressurized water reactor,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 473795, 12 pages, 2009. View at Google Scholar
  5. F. Pierro, D. Araneo, G. Galassi, and F. D'Auria, “Application of REPAS methodology to assess the reliability of passive safety systems,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 768947, 18 pages, 2009. View at Google Scholar
  6. J. Xiong, Y. Yang, and X. Cheng, “CFD application to hydrogen risk analysis and PAR qualification,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 213981, 10 pages, 2009. View at Publisher · View at Google Scholar
  7. P. Royl, J. R. Travis, W. Breitung, J. Kim, and S. B. Kim, “GASFLOW validation with panda tests from the OECD SETH benchmark covering steam/air and steam/helium/air mixtures,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 759878, 13 pages, 2009. View at Google Scholar
  8. J. Xiao, J. R. Travis, and W. Breitung, “Non-Boussinesq integral model for horizontal turbulent buoyant round jets,” Science and Technology of Nuclear Installations, vol. 2009, Article ID 862934, 7 pages, 2009. View at Google Scholar