Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2012 (2012), Article ID 795935, 8 pages
http://dx.doi.org/10.1155/2012/795935
Research Article

CFD Modeling of Boiling Flow in PSBT 5×5 Bundle

CD-adapco, Trident House, Basil Hill Road, Didcot OX11 7HJ, UK

Received 17 January 2012; Accepted 8 May 2012

Academic Editor: Annalisa Manera

Copyright © 2012 Simon Lo and Joseph Osman. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • Kosuke Hayashi, Shigeo Hosokawa, and Akio Tomiyama, “Void distribution and bubble motion in bubbly flows in a 4 x 4 rod bundle. Part II: numerical simulation,” Journal of Nuclear Science and Technology, vol. 51, no. 5, pp. 580–589, 2014. View at Publisher · View at Google Scholar
  • Xiaochang Li, and Ye Gao, “Methods of simulating large-scale rod bundle and application to a 17×17 fuel assembly with mixing vane spacer grid,” Nuclear Engineering and Design, vol. 267, pp. 10–22, 2014. View at Publisher · View at Google Scholar
  • Ye Gao, Xiao-Chang Li, and Ping-An Liu, “Parameter sensitivity analysis of subcooled boiling model,” Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, vol. 48, pp. 257–263, 2014. View at Publisher · View at Google Scholar
  • Satbyoul Jung, Hyungdae Kim, and Seunghyuck Jeong, “Experimental study on geometry of a microlayer during single-bubble nucleate boiling,” Transactions of the Korean Society of Mechanical Engineers, B, vol. 39, no. 6, pp. 519–526, 2015. View at Publisher · View at Google Scholar
  • Antonio J. Torregrosa, Pablo Olmeda, Antonio Gil, and Omar Cornejo, “Computational fluid dynamics assessment of subcooled flow boiling in internal-combustion engine-like conditions at low flow velocities with a volume-o,” Proceedings Of The Institution Of Mechanical Engineers Part D-Journal Of Automobile Engineering, vol. 229, no. 13, pp. 1830–1839, 2015. View at Publisher · View at Google Scholar
  • YoungSoo Kim, HuiYung Kim, JinYeong Bak, JaeJun Jeong, JaeYeong Jeon, and ByongJo Yun, “Evaluation of thermal hydraulic safety of a nuclear fuel assembly in a mast assembly of nuclear power plant,” Annals of Nuclear Energy, vol. 92, pp. 136–149, 2016. View at Publisher · View at Google Scholar
  • R. Thakrar, J. Murallidharan, and S.P. Walker, “CFD investigation of nucleate boiling in non-circular geometries at high pressure,” Nuclear Engineering and Design, 2016. View at Publisher · View at Google Scholar