Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2014, Article ID 301052, 8 pages
http://dx.doi.org/10.1155/2014/301052
Research Article

Subchannel Analysis of Wire Wrapped SCWR Assembly

Xi’an Jiaotong University, Xi’an, Shannxi 710049, China

Received 10 October 2013; Accepted 13 January 2014; Published 23 February 2014

Academic Editor: Liangzhi Cao

Copyright © 2014 Jianqiang Shan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Buongiorno, W. Corwin, P. Mac Donald et al., “Supercritical water reactor (SCWR) survey of materials experience and R&D needs to assess viability,” Tech. Rep. INEEL/EXT-03-00693 (Revision 1), Idaho National Engineering Laboratory, Idaho Falls, Idaho, USA, 2003. View at Google Scholar
  2. R. Duffey, I. Pioro, and H. Khartabil, “Supercritical water-cooled pressure channel nuclear reactors: review and status,” in Proceedings of the GLOBAL, Tsukuba, Japan, October 2005.
  3. A. Otsubo, T. Okada, N. Takahashi, K. Sato, and N. Hattori, “Occurrence of wear marks on fast reactor fuel pin cladding,” Journal of Nuclear Science and Technology, vol. 36, no. 6, pp. 522–534, 1999. View at Google Scholar · View at Scopus
  4. X. Cheng and U. Müller, “Critical heat flux and turbulent mixing in hexagonal tight rod bundles,” International Journal of Multiphase Flow, vol. 24, no. 8, pp. 1245–1263, 1998. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Fischer, T. Schulenberg, and E. Laurien, “Design of a supercritical water-cooled reactor with a three-pass core arrangement,” Nuclear Engineering and Design, vol. 239, no. 4, pp. 800–812, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Buongiorno and P. MacDonald, “Supercritical water reactor (SCWR). Progress Report for the FY-03 Generation IV R&D activities for the development of the SCWR in the U.S.,” Tech. Rep. INEEL/EXT-03-01210, Idaho National Engineering and Environmental Laboratory, 2003. View at Google Scholar
  7. S. Himmel, A. G. Class, E. Laurien, and T. Schulenberg, “Determination of mixing coefficients in a wire-wrapped HPLWR fuel assembly using CFD,” in Proceedings of the International Conference on Advances in Nuclear Power Plants (ICAPP '08), pp. 670–679, Anaheim, Calif, USA, June 2008, P.8053. View at Scopus
  8. E. Laurien, H. J. Wang, Y. Zhu, and H. Z. Li, “Flow and heat transfer of a heated rod with a wrapped wire inside a channel,” in Proceedings of the 4th International Symposium on Supercritical Water-Cooled Reactors, Heidelberg, Germany, March 2009, paper no. 29.
  9. L. Chandra, J. L. Nijeholt, D. C. Visser, and F. Roelofs, “CFD analyses on the influence of wire wrap spacers on heat transfer at supercritical conditions,” in Proceedings of the 4th International Symposium on Supercritical Water-Cooled Reactors, Heidelberg, Germany, March 2009, paper no. 30.
  10. J. Q. Shan, B. Zhang, C. Y. Li, and L. K. H. Leung, “SCWR subchannel code ATHAS development and CANDU-SCWR analysis,” Nuclear Engineering and Design, vol. 239, no. 10, pp. 1979–1987, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. I. L. Pioro, R. B. Duffey, and T. J. Dumouchel, “Hydraulic resistance of fluids flowing in channels at supercritical pressures (survey),” Nuclear Engineering and Design, vol. 231, no. 2, pp. 187–197, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. I. L. Pioro, H. F. Khartabil, and R. B. Duffey, “Heat transfer to supercritical fluids flowing in channels—empirical correlations (survey),” Nuclear Engineering and Design, vol. 230, no. 1–3, pp. 69–91, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. H.-Y. Jeong, K.-S. Ha, Y.-M. Kwon, Y.-B. Lee, and D. Hahn, “A dominant geometrical parameter affecting the turbulent mixing rate in rod bundles,” International Journal of Heat and Mass Transfer, vol. 50, no. 5-6, pp. 908–918, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Q. Shan, L. Leung, J. Yang et al., “Subchannel code development for supercritical water-cooled reactor,” in Proceedings of the 4th International Symposium on Supercritical Water-Cooled Reactors, Heidelberg, Germany, March 2009.
  15. C. Y. Li, Subchannel analysis of supercritical water reactor [M.S. thesis], Xi'an Jiaotong University, 2008.
  16. C. Y. Li, J. Q. Shan, and L. K. H. Leung, “Subchannel analysis of CANDU-SCWR fuel,” Progress in Nuclear Energy, vol. 51, no. 8, pp. 799–804, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Ninokata, A. Efthimiadis, and N. E. Todreas, “Distributed resistance modeling of wire-wrapped rod bundles,” Nuclear Engineering and Design, vol. 104, no. 1, pp. 93–102, 1987. View at Google Scholar · View at Scopus
  18. T. Schulenberg, J. Starflinger, and J. Heinecke, “Three pass core design proposal for a high performance light water reactor,” in Proceedings of the 2nd International Conference on Innovative Nuclear Energy Systems (COE-INES '06), Yokohama, Japan, November 2006.
  19. C. L. Waata, Coupled Neutronics/Thermal-Hydraulics Analysis of a High-Performance Light-Water Reactor Fuel Assembly, vol. 7233 of FZKA, Forschungszentrums Karlsruhe, Karlsruhe, Germany, 2005.
  20. X. Cheng, T. Schulenberg, D. Bittermann, and P. Rau, “Design analysis of core assemblies for supercritical pressure conditions,” Nuclear Engineering and Design, vol. 223, no. 3, pp. 279–294, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. P. R. Diller, Wire wrapped fuel pin hexagonal arrays for PWR service [Ph.D. thesis], Massachusetts Institute of Technology, 2005.