|
| ID | Description | FR | DE |
|
| 01.2 | Loss of offsite power-loss of electrical bus bar | N | Y |
|
| 02.3 | Reactivity events-transient pressure or temperature changes | Y | N |
|
| 03 | Loss of heat removal system | Y | Y |
|
| 04.1 | Leakages from the primary circuit | Y | N |
| 04.2 | Leakages from primary to secondary circuit | N | Y |
| 04.3 | Primary coolant leakage outside cont. | Y | Y |
|
| 05.1 | Essential water intake clogging | Y | N |
| 05.2 | Failures in the component cooling or service water systems operating trains | Y | Y |
|
| 07.1 | Scram with influence on reactivity | Y | Y |
|
| 08.2 | Other instrumentation and control failures affecting the reactor protection system | N | Y |
| 08.3 | Instrumentation and control failures related to other safety systems | Y | — |
|
| 09.1 | Complete emergency diesel generator failure | Y | Y |
| 09.3 | Incipient emergency diesel generator failure | Y | N |
|
| 10.2 | Control rod events without influence on reactivity | N | Y |
|
| 12 | Common cause failure events | Y | N |
|
| 13.2 | Failure of 1 safety system redundancy | — | Y |
| 13.3 | Failure of a safety system component | — | Y |
| 13.4 | Failure of safety features redundancies | Y | — |
|
| 14 | Actuation of safety features | Y | Y |
|
| 15 | Lubricant | Y | N |
|
| 16.1 | Circuit misalignment (human/organization) | Y | N |
| 16.2 | Risk analysis (human/organization) | Y | N |
| 16.3 | Inadequate maintenance quality (human/organization) | Y | N |
|
| 17.1 | Failure after release from maintenance or design modification | Y | — |
| 17.2 | Failure caused by plant design modification | Y | — |
| 17.3 | Failure caused by using temporary devices | Y | — |
| 17.4 | Failure related to NPP modification | — | Y |
|
| 18.1 | Event external to the site | Y | N |
|
| 19.3 | Other reportable internal fires | N | Y |
|
| 21 | Design/construction | Y | N |
|
