Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2015, Article ID 198654, 13 pages
http://dx.doi.org/10.1155/2015/198654
Research Article

Heat Transfer Calculation on Plate-Type Fuel Assembly of High Flux Research Reactor

1Department of Engineering Physics, Tsinghua University, Beijing 100086, China
2Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics, Mianyang 621900, China

Received 9 January 2015; Revised 2 April 2015; Accepted 16 April 2015

Academic Editor: Hyung-Jin Shim

Copyright © 2015 Daxin Gong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. IAEA, IAEA Research Reactor Data Base (RRDB), IAEA, 2014, http://nucleus.iaea.org/RRDB/RR/ReactorSearch.aspx.
  2. Y. Sudo, H. Ando, H. Ikawa, and N. Ohnishi, “Core thermohydraulic design with 20% LEU fuel for upgraded research reactor JRR-3,” Journal of Nuclear Science and Technology, vol. 22, no. 7, pp. 551–564, 1985. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. Sudo, K. Miyata, H. Ikawa, M. Ohkawara, and M. Kaminaga, “Experimental study of differences in single-phase forced-convection heat transfer characteristics between upflow and downflow for narrow rectangular channel,” Journal of Nuclear Science and Technology, vol. 22, no. 3, pp. 202–212, 1985. View at Publisher · View at Google Scholar · View at Scopus
  4. W. X. Tian, S. Z. Qiu, Y. Guo, G. H. Su, and D. N. Jia, “Development of a thermal-hydraulic analysis code for CARR,” Annals of Nuclear Energy, vol. 32, no. 3, pp. 261–279, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. C. J. Yang, Simulation of three dimensional flow and temperature field in China Advanced Research Reactor (CARR) [M.S. dissertation], China Institute of Atomic Energy, 2006.
  6. K. Wang, Z. G. Li, D. She et al., “Progress on RMC: a Monte Carlo neutron transport code for reactor analysis,” in Proceedings of the International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering (M&C '11), Rio de Janeiro, Brazil, 2011.
  7. CD-adapco Group, STAR-CD Manuals, Version 3.2, CD-adapco Group, 2005.
  8. ANSYS Inc, Fluent 12. 0 User's Guide, ANSYS Inc, 2009.
  9. ANSYS Inc, ANSYS CFX-12.0 User Manual, ANSYS Inc, 2009.
  10. K. Ikeda, Y. Makino, and M. Hoshi, “Single-phase CFD applicability for estimating fluid hot-spot locations in a 5 × 5 fuel rod bundle,” Nuclear Engineering and Design, vol. 236, no. 11, pp. 1149–1154, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. C. C. Liu and Y. M. Ferng, “Numerically simulating the thermal–hydraulic characteristics within the fuel rod bundle using CFD methodology,” Nuclear Engineering and Design, vol. 240, no. 10, pp. 3078–3086, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. M. R. Nematollahi and M. Nazifi, “Enhancement of heat transfer in a typical pressurized water reactor by different mixing vanes on spacer grids,” Energy Conversion and Management, vol. 49, no. 7, pp. 1981–1988, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. M. E. Conner, E. Baglietto, and A. M. Elmahdi, “CFD methodology and validation for single-phase flow in PWR fuel assemblies,” Nuclear Engineering and Design, vol. 240, no. 9, pp. 2088–2095, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Kim, S.-O. Yu, and H.-J. Kim, “Analyses on fluid flow and heat transfer inside Calandria vessel of CANDU-6 using CFD,” Nuclear Engineering and Design, vol. 236, no. 11, pp. 1155–1164, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Salama and S. E.-D. El-Morshedy, “CFD simulation of flow blockage through a coolant channel of a typical material testing reactor core,” Annals of Nuclear Energy, vol. 41, pp. 26–39, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Song, Y. Guo, and H. Y. Zeng, “Numerical analysis on transient flow and temperature field during inlet flow blockage accidents of plate-type fuel assembly,” Nuclear Power Engineering, vol. 35, no. 3, pp. 6–10, 2014 (Chinese). View at Google Scholar
  17. Y. Bae, Y. I. Kim, and C. T. Park, “CFD analysis of flow distribution at the core inlet of SMART,” Nuclear Engineering and Design, vol. 258, pp. 19–25, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. D. Jo, O. S. Al-Yahia, R. M. Altamimi, J. Park, and H. Chae, “Experimental investigation of convective heat transfer in a narrow rectangular channel for upward and downward flows,” Nuclear Engineering and Technology, vol. 46, no. 2, pp. 195–206, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Ma, L. Li, Y. Huang, and X. Liu, “Experimental studies on single-phase flow and heat transfer in a narrow rectangular channel,” Nuclear Engineering and Design, vol. 241, no. 8, pp. 2865–2873, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. G. C. Wu, Continuous energy Monte Carlo physical analysis on the core with thermal neutron trap [M.S. thesis], Tsinghua University, 2014.