Research Article
Reliability Evaluation of NPP’s Power Supply System Based on Improved GO-FLOW Method
Table 1
The improved GO-FLOW method used in NPP’s power supply system.
| Item | The existing GO-FLOW method | The improved GO-FLOW method | The quantitative calculation method after being improved |
| Considering components’ repair rate or not | No | GO-FLOW operator algorithm is improved by introducing repair rate | For example, the success probability of components with two states at time () is as
|
| Considering total signaling or not | No | Synthesize the effect of total signaling | The existing probability of the terminal signal in a system with total signals is as
|
| Considering common cause failure or not | Yes | Yes | At time , the common cause failure probability of a system with repairable components is as
|
| Applicable to complex repairable system with multistates or not | Calculation error | Much more reasonable results | For example, states transition equation of repairable components with three states is as
|
|
|