Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2016, Article ID 8353256, 8 pages
http://dx.doi.org/10.1155/2016/8353256
Research Article

Measurement of the Residual Stresses and Investigation of Their Effects on a Hardfaced Grid Plate due to Thermal Cycling in a Pool Type Sodium-Cooled Fast Reactor

1KCG College of Technology, Karapakkam, Chennai, India
2Department of Mechanical Engineering, Anna University, Chennai, India
3Nuclear & Safety Engineering Group, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam, India

Received 18 November 2015; Accepted 14 February 2016

Academic Editor: Hyeong-Yeon Lee

Copyright © 2016 S. Balaguru et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Vasantharaja, V. Maduarimuthu, M. Vasudevan, and P. Palanichamy, “Assessment of residual stresses and distortion in stainless steel weld joints,” Materials and Manufacturing Processes, vol. 27, no. 12, pp. 1376–1381, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. S. K. Ray, V. Shankar, V. Balasubramanian, Sethi, and S. L. Mannan, “Heat treatment of austenitic stainless steel components,” Transactions of The Indian Institute of Materials, pp. 249–251, 2003. View at Google Scholar
  3. M. Selvaraj, V. Murali, and S. R. Koteswara Rao, “Mechanism of weld formation during friction stir welding of aluminum alloy,” Materials and Manufacturing Processes, vol. 28, no. 5, pp. 595–600, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. A. K. Bhaduri, R. India, B. P. S. Rao et al., Hardfacing of NSSS Components of PFBR, Transactions of The Indian Institute of Materials, 2003.
  5. S. Murugan, P. V. Kumar, T. P. S. Gill, B. Raj, and M. S. C. Bose, “Numerical modelling and experimental determination of temperature distribution during manual metal arc welding,” Science and Technology of Welding and Joining, vol. 4, no. 6, pp. 357–364, 1999. View at Publisher · View at Google Scholar · View at Scopus
  6. A. R. Kohandehghan, S. Serajzadeh, and A. H. Kokabi, “A study on residual stresses in gas tungsten arc welding of AA5251,” Materials and Manufacturing Processes, vol. 25, no. 11, pp. 1242–1250, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. H. C. Dey, A. K. Bhaduri, S. Mahadevan et al., “Residual stress distribution in hardfaced austenitic stainless steel sleeves,” Transactions of the Indian Institute of Metals, vol. 57, no. 3, pp. 271–276, 2004. View at Google Scholar · View at Scopus
  8. P. Chellapandi, S. C. Chetal, and B. Raj, “Investigation on buckling of FBR vessels under seismic loadings with fluid structure interactions,” Nuclear Engineering and Design, vol. 238, no. 12, pp. 3208–3217, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. M. K. Park, R. A. Sindhu, S. J. Lee, B. A. Zai, and H. Mehboob, “A residual stress evaluation in laser welded lap joint with hole drilling method,” International Journal of Precision Engineering and Manufacturing, vol. 10, no. 5, pp. 89–95, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Sedighi and M. Mahmoodi, “Residual stress, nanohardness, and microstructure changes in whirlwind milling of GCr15 steel,” Materials and Manufacturing Processes, vol. 28, pp. 85–90, 2013. View at Google Scholar
  11. U. Makoto, K. Jinya, N. Hiroyuki, and O. Kunio, “Evaluation of residual stress near the weld overlay cladding by welding and post-weld heat treatment,” Welding International, vol. 28, no. 7, pp. 521–534, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. N. Murugan and R. Narayanan, “Finite element simulation of residual stresses and their measurement by contour method,” Materials and Design, vol. 30, no. 6, pp. 2067–2071, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. A. A. Antonov and O. E. Kapustin, “Determination of maximum residual stresses in butt-welded joints in transmission pipelines,” Welding International, vol. 25, no. 7, pp. 556–561, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. G. S. Schajer, “Advances in Hole-drilling residual stress measurements,” Experimental Mechanics, vol. 50, no. 2, pp. 159–168, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Nakacho, T. Ohta, N. Ogawa et al., “Measurement of welding residual stresses of reactor vessel by inherent strain method: measurement of residual stresses of pipe-plate penetration joint,” Welding International, vol. 23, no. 6, pp. 439–449, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. A. K. Bhaduri, R. Indira, S. K. Albert, B. P. S. Rao, S. C. Jain, and S. Asokkumar, “Selection of hardfacing material for components of the Indian Prototype Fast Breeder Reactor,” Journal of Nuclear Materials, vol. 334, no. 2-3, pp. 109–114, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Balasubramanian, A. Lakshminarayanan, R. Varahamoorthy, and S. Babu, “Application of response surface methodolody to prediction of dilution in plasma transferred arc hardfacing of stainless steel on carbon steel,” Journal of Iron and Steel Research International, vol. 16, no. 1, pp. 44–53, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. C. Sudha, P. Shankar, R. V. S. Rao, R. Thirumurugesan, M. Vijayalakshmi, and B. Raj, “Microchemical and microstructural studies in a PTA weld overlay of Ni–Cr–Si–B alloy on AISI 304L stainless steel,” Surface and Coatings Technology, vol. 202, no. 10, pp. 2103–2112, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. J. H. Chang, C. P. Chang, J. M. Chou, R. I. Hsieh, and J. L. Lee, “Microstructure and bonding behavior on the interface of an induction-melted Ni-based alloy coating and AISI 4140 steel substrate,” Surface and Coatings Technology, vol. 204, no. 20, pp. 3173–3181, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. D. Kesavan and M. Kamaraj, “The microstructure and high temperature wear performance of a nickel base hardfaced coating,” Surface and Coatings Technology, vol. 204, no. 24, pp. 4034–4043, 2010. View at Publisher · View at Google Scholar
  21. K. Gurumoorthy, M. Kamaraj, K. P. Rao, A. S. Rao, and S. Venugopal, “Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy,” Materials Science and Engineering A, vol. 456, no. 1-2, pp. 11–19, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Balaguru, S. Kumar, V. Murali, and P. Chellapandi, “Thermo mechanical analysis of SS304 circular grid plate hard faced with colmonoy,” Applied Mechanics and Materials, vol. 229-231, pp. 710–717, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Balaguru, K. Deenadayalan, M. Vela, and P. Chellapandi, “Influence of welding speed over dilution for circular grid plate hardfaced with colmonoy-5,” Applied Mechanics and Materials, vol. 565, pp. 53–58, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Balaguru, V. Murali, and P. Chellapandi, “Effects of welding speeds on macro and micrstructures in hardfacing of colmonoy on on un-grooved and grooved 316 L(N) SS base metal,” International Journal Applied Engineering Research, vol. 10, pp. 25627–25631, 2015. View at Google Scholar
  25. K. Punitharani, N. Murugan, and S. M. Sivagami, “Finite element analysis of residual stresses and distortion in hard faced gate valve,” Journal of Scientific and Industrial Research, vol. 69, no. 2, pp. 129–134, 2010. View at Google Scholar · View at Scopus