Table of Contents Author Guidelines Submit a Manuscript
Science and Technology of Nuclear Installations
Volume 2017, Article ID 1839871, 11 pages
https://doi.org/10.1155/2017/1839871
Research Article

Dynamic Behavior Analysis of Touchdown Process in Active Magnetic Bearing System Based on a Machine Learning Method

Zhe Sun,1,2,3 Xunshi Yan,1,2,3 Jingjing Zhao,1,2,3 Xiao Kang,4 Guojun Yang,1,2,3 and Zhengang Shi1,2,3

1Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China
2Collaborative Innovation Center of Advanced Nuclear Energy Technology, Beijing 100084, China
3The Key Laboratory of Advanced Reactor Engineering and Safety, Ministry of Education, Beijing 100084, China
4Mechanical Engineering, Texas A&M University, College Station, TX 77843, USA

Correspondence should be addressed to Zhe Sun; nc.ude.auhgnist@ehz_nus

Received 30 December 2016; Revised 28 August 2017; Accepted 14 September 2017; Published 18 October 2017

Academic Editor: Eugenijus Ušpuras

Copyright © 2017 Zhe Sun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Ishii and R. G. Kirk, “Transient response technique applied to active magnetic bearing machinery during rotor drop,” Journal of Rotating Machinery and Vehicle Dynamics, pp. 191–199, 1991. View at Google Scholar
  2. M. Fumagalli and G. Schweitzer, “Measurements on a rotor contacting its housing,” in Proceedings of the in Imeche Conference Transactions, vol. 6, pp. 779–788, 1996.
  3. Z. Fang and L. E. Barrett, “Transient response of single disk rotor with active magnetic bearings during rotor drop,” Journal of Shanghai Jiaotong University, p. 7, 1996. View at Google Scholar
  4. S. Zeng, “Modelling and experimental study of the transient response of an active magnetic bearing rotor during rotor drop on back-up bearings,” Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, vol. 217, no. 6, pp. 505–517, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Sun, A. B. Palazzolo, A. Provenza, and G. Montague, “Detailed ball bearing model for magnetic suspension auxiliary service,” Journal of Sound and Vibration, vol. 269, no. 3-5, pp. 933–963, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Sun, “Rotor drop and following thermal growth simulations using detailed auxiliary bearing and damper models,” Journal of Sound and Vibration, vol. 289, no. 1-2, pp. 334–359, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. J. G. Lee and A. Palazzolo, “Catcher bearing life prediction using a rainflow counting approach,” Journal of Tribology, vol. 134, no. 3, Article ID 031101, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. P. S. Keogh and W. Y. Yong, “Thermal assessment of dynamic rotor/auxiliary bearing contact events,” Journal of Tribology, vol. 129, no. 1, pp. 143–152, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Schlotter and P. S. Keogh, “Synchronous position recovery control for flexible rotors in contact with auxiliary bearings,” Journal of Vibration and Acoustics, vol. 129, no. 5, pp. 550–558, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. Z.-W. Tan, L. Wan, and S.-Y. He, “Impact simulation of HTR-10 vertical magnetic suspension rotor dropping into catcher bearings in early design phase,” Hedongli Gongcheng/Nuclear Power Engineering, vol. 29, no. 5, pp. 5–8, 2008. View at Google Scholar · View at Scopus
  11. J.-X. Zhao, G.-J. Yang, Y. Li, and S.-Y. Yu, “Numerical analysis of magnetically suspended rotor in htr-10 helium circulator being dropped into auxiliary bearings,” Nuclear Power Engineering, vol. 33, no. 3, pp. 61–64, 2012. View at Google Scholar
  12. Z. Xiao, G. Yang, Z. Shi, and S. Yu, “Behavior of a magnetically suspended rotor dropped into auxiliary bearings,” in Proceedings of the 2013 21st International Conference on Nuclear Engineering, ICONE 2013, August 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Sun, X. Kang, J. Zhao, G. Yang, and Z. Shi, “Dynamic behavior analysis of touchdown process in active magnetic bearing system based on Kalman filtering,” in Proceedings of the 2014 22nd International Conference on Nuclear Engineering, ICONE 2014, July 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Yan, H. Shao, and X. Wang, “Soft sensing modeling based on support vector machine and Bayesian model selection,” Computers & Chemical Engineering, vol. 28, no. 8, pp. 1489–1498, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Luo and H. Shao, “Soft sensing modeling using neurofuzzy system based on rough set theory,” in Proceedings of the 2002 American Control Conference, pp. 543–548, May 2002. View at Scopus
  16. S. C. Patwardhan, J. Prakash, and S. L. Shah, “Soft sensing and state estimation: review and recent trends,” IFAC Proceedings Volumes, vol. 40, no. 19, pp. 65–72, 2007. View at Publisher · View at Google Scholar
  17. K. Worden, W. J. Staszewski, and J. J. Hensman, “Natural computing for mechanical systems research: A tutorial overview,” Mechanical Systems and Signal Processing, vol. 25, no. 1, pp. 4–111, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. F. Wu and T. Chai, “Soft sensing method for magnetic tube recovery ratio via fuzzy systems and neural networks,” Neurocomputing, vol. 73, no. 13-15, pp. 2489–2497, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. E. Terzic, R. Nagarajah, and M. Alamgir, “A neural network approach to fluid quantity measurement in dynamic environments,” Mechatronics, vol. 21, no. 1, pp. 145–155, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Çaya, A. Çiçekb, F. Karac, and S. Sağiroğlua, “Prediction of engine performance for an alternative fuel using artificial neural network,” Applied Thermal Engineering, vol. 37, pp. 217–225, 2012. View at Publisher · View at Google Scholar
  21. E. Kilic, C. U. Dogruer, M. Dolen, and A. B. Koku, “Position estimation for timing belt drives of precision machinery using structured neural networks,” Mechanical Systems and Signal Processing, vol. 29, pp. 343–361, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Sun, J. Zhao, and S. Yu, “Nonlinear nonparametric identification of magnetic bearing system based on support vector regression,” in Proceedings of the 13th International Symposium on Magnetic Bearings, 2012.
  23. Z. Sun, J. Zhao, Z. Shi, and S. Yu, “Soft sensing of magnetic bearing system based on support vector regression and extended Kalman filter,” Mechatronics, vol. 24, no. 3, pp. 186–197, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Sun, “Auxiliary bearing life prediction using Hertzian contact bearing model,” Journal of Vibration and Acoustics, vol. 128, no. 2, pp. 203–209, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. Z. Sun, Z.-K. Zhang, and H.-G. Wang, “Incorporating prior knowledge into kernel based regression,” Acta Automatica Sinica, vol. 34, no. 12, pp. 1515–1521, 2008. View at Publisher · View at Google Scholar · View at MathSciNet
  26. A. J. Smola and B. Schölkopf, “A tutorial on support vector regression,” Statistics and Computing, vol. 14, no. 3, pp. 199–222, 2004. View at Publisher · View at Google Scholar · View at MathSciNet
  27. N. Cristianini and J. Shawe-Taylor, An Introduction to Support Vector Machines, Cambridge University Press, Cambridge,UK, 2000. View at Publisher · View at Google Scholar
  28. Y. Zhao, G. Yang, X. Liu, Z. Shi, and L. Zhao, “Research on dynamics and experiments about auxiliary bearings for the helium circulator of the 10 MW high temperature gas-cooled reactor,” Annals of Nuclear Energy, vol. 95, pp. 176–187, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Zhao, G. Yang, P. Keogh, and L. Zhao, “Dynamic Analysis for the Rotor Drop Process and Its Application to a Vertically Levitated Rotor/Active Magnetic Bearing System,” Journal of Tribology, vol. 139, no. 4, p. 041701, 2017. View at Publisher · View at Google Scholar
  30. F. E. Cellier and E. Kofman, Continuous System Simulation, Springer Science+Business Media, Boston, Mass, USA, 2006.
  31. H. Meschkowski, Hilbertsche Räume mit Kernfunction, Die Grundlehren der mathematischen Wissenschaften, Bd. 113, Springer, Berlin, Germany, 1962. View at MathSciNet
  32. B. Schölkopf and A. J. Smola, Learning with Kernels: Support Vector Machines, Regularization, Optimization, and beyond, The MIT Press, Cambridge, Mass, USA, 2003. View at Publisher · View at Google Scholar · View at MathSciNet
  33. X. Kang, G. Yang, and S. Yu, “Dynamic behavior of the AMB's vertical arranged rotor during its drop process,” in Proceedings of the 2014 22nd International Conference on Nuclear Engineering, ICONE 2014, July 2014. View at Publisher · View at Google Scholar · View at Scopus