Research Article
The Trimming-Based Design Method for PWR Coolant Flow Distribution Device
Table 1
The parameters and boundary conditions of the simulation model.
| The parameters |
| The turbulence model | SST model |
| Fluid | Water |
| The temperature of the fluid | 300°C |
| System reference pressure | 15.5 MPa |
| The boundary conditions |
| Inlet velocity | 4.45 m/s |
| Turbulence intensity | 1.9% |
| Hydraulic diameter | 675 mm |
| Outlet pressure (average static pressure) | 0 Pa |
|
|