Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 17 (2010), Issue 3, Pages 219-231
http://dx.doi.org/10.3233/SAV-2010-0507

Shaker Random Testing with Low Kurtosis: Review of the Methods and Application for Sigma Limiting

Alexander Steinwolf

Department of Mechanical Engineering, University of Auckland, Auckland, New Zealand

Received 16 July 2007

Copyright © 2010 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [9 citations]

The following is the list of published articles that have cited the current article.

  • Alexander Steinwolf, “Random vibration testing with kurtosis control by IFFT phase manipulation,” Mechanical Systems and Signal Processing, vol. 28, pp. 561–573, 2012. View at Publisher · View at Google Scholar
  • Jiayan Chen, Zhangwei Chen, Huinong He, and Jianchuan Zhou, “Concurrent control strategy research for non-Gaussian random vibration test,” Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, vol. 48, no. 4, pp. 193–198, 2012. View at Publisher · View at Google Scholar
  • Frédéric Kihm, and David Delaux, “Vibration Fatigue and Simulation of Damage on Shaker Table Tests: The Influence of Clipping the Random Drive Signal,” Procedia Engineering, vol. 66, pp. 549–564, 2013. View at Publisher · View at Google Scholar
  • Yu Jiang, Junyong Tao, and Dezhi Wang, “Simulation of non-Gaussian stochastic processes by amplitude modulation and phase reconstruction,” Wind and Structures, vol. 18, no. 6, pp. 693–715, 2014. View at Publisher · View at Google Scholar
  • A. Steinwolf, S. M. Schwarzendahl, and J. Wallaschek, “Implementation of low-kurtosis pseudo-random excitations to compensate for the effects of nonlinearity on damping estimation by the half-power method,” Journal of Sound and Vibration, vol. 333, no. 3, pp. 1011–1023, 2014. View at Publisher · View at Google Scholar
  • Lutao Yan, Zhipeng Yang, Fei Gao, and Jie Liu, “Power spectral density compensation algorithm for signal clipping in vibration test,” Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis, vol. 35, no. 4, pp. 690–696, 2015. View at Publisher · View at Google Scholar
  • Alexander Steinwolf, “Vibration testing of vehicle components by random excitations with increased kurtosis,” International Journal of Vehicle Noise and Vibration, vol. 11, no. 1, pp. 39–66, 2015. View at Publisher · View at Google Scholar
  • Xiwen Chen, Xiaoqian Li, and Shuanghua Shen, “The Design and Application of New Control Model for Ultrasonic Vibration Power Supply,” Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis, vol. 37, no. 4, pp. 703–708, 2017. View at Publisher · View at Google Scholar
  • Han Meng, Hai Huang, and Zhou Huang, “Multi-degree-of-freedom non-Gaussian random vibration control,” Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, vol. 38, no. 2, 2017. View at Publisher · View at Google Scholar