Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 18 (2011), Issue 3, Pages 437-445
http://dx.doi.org/10.3233/SAV-2010-0524

Three-Dimensional Shock Spectrum of Critical Component for Nonlinear Packaging System

Jun Wang,1,2 Zhi-Wei Wang,3 Li-Xin Lu,1,2 Yong Zhu,3 and Yong-Guang Wang1

1Department of Packaging Engineering, Jiangnan University, Wuxi, China
2Key laboratory of food packaging techniques & safety of China national packaging corporation, Wuxi, China
3Packaging Engineering Institute, Jinan University, Zhuhai, China

Received 22 July 2008; Revised 6 July 2009

Copyright © 2011 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [32 citations]

The following is the list of published articles that have cited the current article.

  • Jun Wang, Yasir Khan, Rui-Hua Yang, Li-Xin Lu, Zhi-wei Wang, and Naeem Faraz, “A mathematical modelling of inner-resonance of tangent nonlinear cushioning packaging system with critical components,” Mathematical and Computer Modelling, vol. 54, no. 11-12, pp. 2573–2576, 2011. View at Publisher · View at Google Scholar
  • Jun Wang, Fang Duan, Rui-Hua Yang, Zheng-Biao Li, Li-Xin Lu, and Hong Xiang, “Inner-resonance for a coupled oscillator arising in a cubic nonlinear packaging system with critical component,” Zeitschrift fur Naturforschung - Section A Journal of Physical Sciences, vol. 66, no. 10-11, pp. 692–695, 2011. View at Publisher · View at Google Scholar
  • Jun Wang, Fang Duan, Jiu-Hong Jiang, Li-Xin Lu, and Zhi-Wei Wang, “Dropping damage evaluation for a hyperbolic tangent cushioning system with a critical component,” JVC/Journal of Vibration and Control, vol. 18, no. 10, pp. 1417–1421, 2012. View at Publisher · View at Google Scholar
  • Wang, Khan, Lu, and Wang, “Inner resonance of a coupled hyperbolic tangent nonlinear oscillator arising in a packaging system,” Applied Mathematics and Computation, vol. 218, no. 15, pp. 7876–7879, 2012. View at Publisher · View at Google Scholar
  • Jun Wang, Xiang Hong, Yi Qian, Zhi-wei Wang, and Li-xin Lu, “Inverse Sub-Structuring Method for Multi-Coordinate Coupled Product Transport System,” Packaging Technology and Science, vol. 27, no. 5, pp. 385–408, 2013. View at Publisher · View at Google Scholar
  • Jun Wang, Yasir Khan, Rui-Hua Yang, Li-Xin Lu, and Zhi-wei Wang, “Dynamical Behaviors of a Coupled Cushioning Packaging Model with Linear and Nonlinear Stiffness,” Arabian Journal for Science and Engineering, vol. 38, no. 6, pp. 1625–1629, 2013. View at Publisher · View at Google Scholar
  • Jun Wang, Zhi-Wei Wang, Fang Duan, Li-Xin Lu, De Gao, and An-Jun Chen, “Dropping shock response of corrugated paperboard cushioning packaging system,” JVC/Journal of Vibration and Control, vol. 19, no. 3, pp. 336–340, 2013. View at Publisher · View at Google Scholar
  • Jian-Wei Zhou, Dong-Hong Liu, Lan-Yuan Shao, and Zhen-Lin Wang, “Application of digital image correlation to measurement of packaging material mechanical properties,” Mathematical Problems in Engineering, vol. 2013, 2013. View at Publisher · View at Google Scholar
  • An-Jun Chen, “Application of Variational Iteration Method with Energy Method for Nonlinear Equation Arisen from Packaging System,” Mathematical Problems in Engineering, vol. 2013, pp. 1–5, 2013. View at Publisher · View at Google Scholar
  • Jun Zhou, “Comment on “Nonlinear Response of Strong Nonlinear System Arisen in Polymer Cushion”,” Abstract and Applied Analysis, vol. 2013, pp. 1–3, 2013. View at Publisher · View at Google Scholar
  • De Gao, Fu-De Lu, and Si-Jia Chen, “Drop impact analysis of cushioning system with an elastic critical component of cantilever beam type,” Mathematical Problems in Engineering, vol. 2013, 2013. View at Publisher · View at Google Scholar
  • Jun Wang, “He's Max-Min approach for coupled cubic nonlinear equations arising in packaging system,” Mathematical Problems in Engineering, vol. 2013, 2013. View at Publisher · View at Google Scholar
  • An-Jun Chen, “Resonance analysis for tilted support spring coupled nonlinear packaging system applying variational iteration method,” Mathematical Problems in Engineering, vol. 2013, 2013. View at Publisher · View at Google Scholar
  • Meiping Wu, Yun Wang, and Chaofeng Zhang, “A Mathematical Modeling of Resonances of the Nonlinear Tilted Support Spring System under Harmonic Excitation,” Mathematical Problems in Engineering, vol. 2013, pp. 1–5, 2013. View at Publisher · View at Google Scholar
  • Mohammad Ghoreishi, A. I. B. Md. Ismail, and Abdur Rashid, “On the Convergence of the Homotopy Analysis Method for Inner-Resonance of Tangent Nonlinear Cushioning Packaging System with Critical Components,” Abstract and Applied Analysis, 2013. View at Publisher · View at Google Scholar
  • Changfeng Ge, and Steven Sutherland, “Application of experimental modal analysis to determine damping properties for stacked corrugated boxes,” Mathematical Problems in Engineering, vol. 2013, 2013. View at Publisher · View at Google Scholar
  • Na Wei, Yingfeng Meng, Gao Li, Liping Wan, Zhaoyang Xu, Xiaofeng Xu, and Yurui Zhang, “Cuttings transport models and experimental visualization of underbalanced horizontal drilling,” Mathematical Problems in Engineering, vol. 2013, 2013. View at Publisher · View at Google Scholar
  • De Gao, and Fu-de Lu, “Nonlinear Dynamic Analysis of Series Cushioning System Made with Expanded Polyethylene and Corrugated Paperboard,” Advances in Mechanical Engineering, 2013. View at Publisher · View at Google Scholar
  • Jun Wang, Li-xin Lu, Huan-xin Jiang, and Yong Zhu, “Nonlinear Response of Strong Nonlinear System Arisen in Polymer Cushion,” Abstract and Applied Analysis, vol. 2013, pp. 1–3, 2013. View at Publisher · View at Google Scholar
  • Xiang Hong, Jun Wang, and Li-xin Lu, “Application of Homotopy Perturbation Method with an Auxiliary Term for Nonlinear Dropping Equations Arisen in Polymer Packaging System,” Mathematical Problems in Engineering, vol. 2013, pp. 1–5, 2013. View at Publisher · View at Google Scholar
  • Pankaj B. Pathare, and Umezuruike Linus Opara, “Structural design of corrugated boxes for horticultural produce: A review,” Biosystems Engineering, vol. 125, pp. 128–140, 2014. View at Publisher · View at Google Scholar
  • Fu-de Lu, and De Gao, “Impact Responses of Composite Cushioning System considering Critical Component with Simply Supported Beam Type,” Advances in Mechanical Engineering, vol. 2014, pp. 1–6, 2014. View at Publisher · View at Google Scholar
  • Shuang Song, Ning-ning Duan, and An-jun Chen, “Application of Variational Iteration Method for Dropping Damage Evaluation of the Suspension Spring Packaging System,” Abstract and Applied Analysis, vol. 2014, pp. 1–7, 2014. View at Publisher · View at Google Scholar
  • Ningning Duan, Shuang Song, and Anjun Chen, “The Dynamic Evaluation of Tilted Support Spring Nonlinear System with Critical Components under the Action of a Rectangular Pulse,” Mathematical Problems in Engineering, 2014. View at Publisher · View at Google Scholar
  • An-Jun Chen, “The Shock Characteristics of Tilted Support Spring Packaging System with Critical Components,” Shock and Vibration, 2014. View at Publisher · View at Google Scholar
  • Xiaohui Yang, and Yuji Liu, “Existence of unbounded solutions of boundary value problems for singular differential systems on whole line,” Boundary Value Problems, vol. 2015, no. 1, 2015. View at Publisher · View at Google Scholar
  • Jun Wang, Li-xin Lu, Pengjiang Qian, Li-qiang Huang, Yan Hua, and Guang-yi Pu, “Indirect Inverse Substructuring Method for Multibody Product Transport System with Rigid and Flexible Coupling,” Shock And Vibration, 2015. View at Publisher · View at Google Scholar
  • Jing Qian, Heping Cai, Weiwei Ma, and Zhiwei Hao, “Shock Analysis on a Packaged Washing Machine from Damage Boundary: Shock Response Spectrum to Component Failure,” Shock and Vibration, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • Meng Hao, and An-Jun Chen, “Dropping Impact Characteristics Analysis of a Cubic Nonlinear Packaging System with a Cantilever Beam Type Elastic Critical Component with Concentrated Tip Mass,” Shock and Vibration, vol. 2015, pp. 1–10, 2015. View at Publisher · View at Google Scholar
  • Zhi-geng Fan, Li-xin Lu, and Jun Wang, “Effect of Fatigue Damage on Energy Absorption Properties of Honeycomb Paperboard,” Shock and Vibration, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • Ningning Duan, Meng Hao, and Anjun Chen, “Damage Evaluation of Critical Components of Tilted Support Spring Nonlinear System under a Rectangular Pulse,” Mathematical Problems in Engineering, vol. 2015, pp. 1–9, 2015. View at Publisher · View at Google Scholar
  • An-Jun Chen, “Ren-He’s method for solving dropping shock response of nonlinear packaging system,” Advances in Difference Equations, vol. 2016, no. 1, 2016. View at Publisher · View at Google Scholar