Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014 (2014), Article ID 219489, 11 pages
http://dx.doi.org/10.1155/2014/219489
Research Article

Numerical Simulation of Rock Fragmentation under the Impact Load of Water Jet

School of Mechanical and Electrical Engineering, China University of Mining & Technology, Xuzhou 221116, China

Received 28 October 2013; Accepted 3 December 2013; Published 12 February 2014

Academic Editor: Vadim V. Silberschmidt

Copyright © 2014 Jiang Hongxiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [12 citations]

The following is the list of published articles that have cited the current article.

  • Hongxiang Jiang, Changlong Du, Songyong Liu, and Liping Wang, “Theoretical Modeling of Rock Breakage by Hydraulic and Mechanical Tool,” Mathematical Problems in Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Yong Liu, Jianping Wei, and Ting Ren, “Analysis of the Stress Wave Effect During Rock Breakage by Pulsating Jets,” Rock Mechanics and Rock Engineering, 2015. View at Publisher · View at Google Scholar
  • Xiaohui Liu, Songyong Liu, and Huifu Ji, “Mechanism of rock breaking by pick assisted with water jet of different modes,” Journal of Mechanical Science and Technology, vol. 29, no. 12, pp. 5359–5368, 2015. View at Publisher · View at Google Scholar
  • Hongxiang Jiang, Changlong Du, Kehong Zheng, and Songyong Liu, “Experimental research on the rock fragmentation loads of a water jet-assisted cutting head,” Tehnicki Vjesnik, vol. 22, no. 5, pp. 1277–1285, 2015. View at Publisher · View at Google Scholar
  • Xigui Zheng, Jinbo Hua, Nong Zhang, Xiaowei Feng, and Lei Zhang, “ Simulation of the Load Evolution of an Anchoring System under a Blasting Impulse Load Using FLAC 3D ,” Shock and Vibration, vol. 2015, pp. 1–7, 2015. View at Publisher · View at Google Scholar
  • A.W. Momber, “The response of geo-materials to high-speed liquid drop impact,” International Journal of Impact Engineering, vol. 89, pp. 83–101, 2016. View at Publisher · View at Google Scholar
  • Songyong Liu, Xiaohui Liu, Weimin Cai, and Huifu Ji, “Dynamic performance of self-controlling hydro-pick cutting rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 83, pp. 14–23, 2016. View at Publisher · View at Google Scholar
  • Hongxiang Jiang, “Design and performance of a novel dynamic rotary sealing device for roadheader with high-pressure water-jets assistance,” Recent Patents on Mechanical Engineering, vol. 9, no. 4, pp. 337–342, 2016. View at Publisher · View at Google Scholar
  • Daolong Yang, Li Jianping, Kehong Zheng, Hongxiang Jiang, Xu Handong, and Songyong Liu, “High-hardness alloy substituted by low hardness during drilling and cutting experiments of conical pick,” International Journal of Rock Mechanics and Mining Sciences, vol. 95, pp. 73–78, 2017. View at Publisher · View at Google Scholar
  • Hongxiang Jiang, Zenghui Liu, and Kuidong Gao, “Numerical simulation on rock fragmentation by discontinuous water-jet using coupled SPH/FEA method,” Powder Technology, vol. 312, pp. 248–259, 2017. View at Publisher · View at Google Scholar
  • Ruihe Wang, Mukun Li, Hongjian Ni, and Guan Wang, “Simulation of thermal stress effects in submerged continuous water jets on the optimal standoff distance during rock breaking,” Powder Technology, vol. 320, pp. 445–456, 2017. View at Publisher · View at Google Scholar
  • Izumi Tanikura, Atsushi Sainoki, Shinya Watanabe, Ren Shintani, and Yuzo Obara, “Quantitative comparison of chipping- and hydrodemolition-induced microscopic damage evolution in concrete substrates,” Construction and Building Materials, vol. 164, pp. 193–205, 2018. View at Publisher · View at Google Scholar