Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014, Article ID 294163, 14 pages
http://dx.doi.org/10.1155/2014/294163
Research Article

Experimental Study of an Adaptive Sequential Nonlinear LSE with Unknown Inputs for Structural Damage Tracking

1State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2Department of Civil & Environmental Engineering, University of California, Irvine, CA 92697, USA

Received 12 May 2013; Revised 9 January 2014; Accepted 25 February 2014; Published 16 March 2014

Academic Editor: Didier Rémond

Copyright © 2014 Tengfei Mu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Bernal and J. Beck, “Special section: phase I of the IASC-ASCE structural health monitoring benchmark,” Journal of Engineering Mechanics, vol. 130, no. 1, pp. 1–127, 2004. View at Google Scholar
  2. F. K. Chang, “Structural health monitoring,” in Proceeding of 8th International Workshop, Stanford, Calif, USA, 2011.
  3. R. Bighamian and H. R. Mirdamadi, “Input/output system identification of simultaneous mass/stiffness damage assessment using discrete-time pulse responses, differential evolution algorithm, and equivalent virtual damped SDOF,” Structural Control and Health Monitoring, vol. 24, no. 4, pp. 576–592, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Humar, A. Bagchi, and H. Xu, “Performance of vibration-based techniques for the identification of structural damage,” Structural Health Monitoring, vol. 5, no. 3, pp. 215–241, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. S. Lee, S. Tsakirtzis, A. F. Vakakis, L. A. Bergman, and D. M. McFarland, “A time-domain nonlinear system identification method based on multiscale dynamic partitions,” Meccanica, vol. 46, no. 4, pp. 625–649, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. J.-W. Lin, R. Betti, A. W. Smyth, and R. W. Longman, “On-line identification of non-linear hysteretic structural systems using a variable trace approach,” Earthquake Engineering and Structural Dynamics, vol. 30, no. 9, pp. 1279–1303, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. J. N. Yang and S. Lin, “Identification of parametric variations of structures based on least squares estimation and adaptive tracking technique,” Journal of Engineering Mechanics, vol. 131, no. 3, pp. 290–298, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. O. Maruyama and M. Hoshiya, “System identification of an experimental model by extended kalman filter,” in Proceedings of Structural Safety and Reliability (ICOSSAR '01), 2001.
  9. J. N. Yang, S. Lin, H. Huang, and L. Zhou, “An adaptive extended Kalman filter for structural damage identification,” Structural Control and Health Monitoring, vol. 13, no. 4, pp. 849–867, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. W. Meiliang and A. W. Smyth, “Application of the unscented Kalman filter for real-time nonlinear structural system identification,” Structural Control and Health Monitoring, vol. 14, no. 7, pp. 971–990, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. J. N. Yang, H. Huang, and S. Lin, “Sequential non-linear least-square estimation for damage identification of structures,” International Journal of Non-Linear Mechanics, vol. 41, no. 1, pp. 124–140, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Sato and K. Qi, “Adaptive H filter: its application to structural identification,” Journal of Engineering Mechanics, vol. 124, no. 11, pp. 1233–1240, 1998. View at Google Scholar · View at Scopus
  13. T. Sato and M. Chung, “Structural identification using adaptive Monte Carlo filter,” Journal of Structural Engineering, vol. 51, pp. 471–477, 2005. View at Google Scholar
  14. D. Wang and A. Haldar, “System identification with limited observations and without input,” Journal of Engineering Mechanics, vol. 123, no. 5, pp. 504–510, 1997. View at Google Scholar · View at Scopus
  15. C. D. Johnson, “Identification of unknown, time-varying forces/moments in dynamics and vibration problems using a new approach to deconvolution,” Shock and Vibration, vol. 5, no. 3, pp. 181–197, 1998. View at Google Scholar · View at Scopus
  16. G. P. Cimellaro, S. Piantà, and A. De Stefano, “Output-only modal identification of ancient L' aquila city hall and civic tower,” Journal of Structural Engineering, vol. 138, no. 4, pp. 481–491, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. G. Qu, H. X. Hua, and G. Meng, “A domain decomposition approach for vibration analysis of isotropic and composite cylindrical shells with arbitrary boundaries,” Composite Structures, vol. 95, pp. 307–321, 2013. View at Google Scholar
  18. J. Lardiès, “A stochastic realisation algorithm with application to modal parameter estimation,” Mechanical Systems and Signal Processing, vol. 15, no. 2, pp. 275–285, 2001. View at Publisher · View at Google Scholar · View at Scopus
  19. S. R. Ibrahim, “Efficient random decrement computation for identification of ambient responses,” in International Society for Optical Engineering, vol. 4359 of Proceedings of SPIE, pp. 1–6, Kissimmee, Fla, USA, 2001.
  20. F. Kozin, “Estimation of parameters for system driven by white noise excitation,” in Proceedings of the IUTAM Symposium on Random Vibrations and Reliability, pp. 163–173, Frankfurt Ioder, Germany, 1985.
  21. K. Toki, T. Sato, and J. Kiyono, “Identification of structural parameter s and input ground motion from response time history,” Structural Engineering, vol. 6, no. 2, pp. 413–421, 1989. View at Google Scholar
  22. X. Ling and A. Haldar, “Element level system identification with unknown input with Rayleigh damping,” Journal of Engineering Mechanics, vol. 130, no. 8, pp. 877–885, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Chen and J. Li, “Simultaneous identification of structural parameters and input time history from output-only measurements,” Computational Mechanics, vol. 33, no. 5, pp. 365–374, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. J.-Y. Wang, J.-Y. Chen, Z.-K. Li, and J.-Y. Liu, “Study on identification method for a structure with non-proportional damping and unknown input,” Journal of Vibration and Shock, vol. 26, no. 4, pp. 119–125, 2007. View at Google Scholar · View at Scopus
  25. S. S. Law, K. Zhang, and Z. D. Duan, “Structural damage detection from coupling forces between substructures under support excitation,” Engineering Structures, vol. 32, no. 8, pp. 2221–2228, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. J. N. Yang, S. Pan, and S. Lin, “Least-squares estimation with unknown excitations for damage identification of structures,” Journal of Engineering Mechanics, vol. 133, no. 1, pp. 12–21, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. J. N. Yang, S. Pan, and H. Huang, “An adaptive extended Kalman filter for structural damage identifications II: unknown inputs,” Structural Control and Health Monitoring, vol. 14, no. 3, pp. 497–521, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. J. N. Yang and H. Huang, “Sequential non-linear least-square estimation for damage identification of structures with unknown inputs and unknown outputs,” International Journal of Non-Linear Mechanics, vol. 42, no. 5, pp. 789–801, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. J. N. Yang and H. Huang, “Damage tracking of base-isolated building using sequential nonlinear LSE with unknown inputs and outputs,” in Smart Structures and Materials: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Proceedings of SPIE, San Diego, Calif, USA, March 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Narasimhan, S. Nagarajaiah, E. A. Johnson, and H. P. Gavin, “Smart base-isolated benchmark building. Part I: problem definition,” Structural Control and Health Monitoring, vol. 13, no. 2-3, pp. 573–588, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. B.-J. Chen, C. S. Tsai, L. L. Chung, and T.-C. Chiang, “Seismic behavior of structures isolated with a hybrid system of rubber bearings,” Structural Engineering and Mechanics, vol. 22, no. 6, pp. 761–783, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. J. Zhao, J. Sun, C.-H. Lai, and W. Xu, “An improved quantum-behaved particle swarm optimization for multi-peak optimization problems,” International Journal of Computer Mathematics, vol. 88, no. 3, pp. 517–532, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. L. Zhou, S. Wu, and J. N. Yang, “Experimental study of an adaptive extended Kalman filter for structural damage identification,” Journal of Infrastructure Systems, vol. 14, no. 1, pp. 42–51, 2008. View at Publisher · View at Google Scholar · View at Scopus
  34. Q. Yin and L. Zhou, “Structural damage identification based on GA optimized least square estimation,” Journal of Vibration and Shock, vol. 29, no. 8, pp. 155–159, 2010. View at Google Scholar · View at Scopus
  35. J. N. Yang, J.-H. Kim, and A. K. Agrawal, “Resetting semiactive stiffness damper for seismic response control,” Journal of Structural Engineering, vol. 126, no. 12, pp. 1427–1433, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. K. Wen, “Methods of random vibration for inelastic structures,” Applied Mechanical Reviews, vol. 42, no. 2, pp. 39–52, 1989. View at Google Scholar
  37. Y. K. Wen and A. H. Ang, “Inelastic modeling and system identification,” in Structural Safety Evaluation Based on System Identification Approaches, pp. 142–160, 1988. View at Google Scholar
  38. F. Ma, H. Zhang, A. Bockstedte, G. C. Foliente, and P. Paevere, “Parameter analysis of the differential model of hysteresis,” in Proceedings of the IUTAM Symposium on Nonlinear Stochastic Dynamics, pp. 257–268, Springer, 2003.
  39. X.-M. Wang and L. Zhou, “Modeling of a rubber bearing and its parameters estimation based on its dynamic response,” Journal of Vibration and Shock, vol. 27, no. 1, pp. 146–150, 2008. View at Google Scholar · View at Scopus
  40. Q. Yin, L. Zhou, and X. Wang, “Parameter identification of hysteretic model of rubber-bearing based on sequential nonlinear least-square estimation,” Earthquake Engineering and Engineering Vibration, vol. 9, no. 3, pp. 375–383, 2010. View at Publisher · View at Google Scholar · View at Scopus
  41. A. Agrawal, P. Tan, S. Nagarajaiah, and J. Zhang, “Benchmark structural control problem for a seismically excited highway bridge. Part I: phase I problem definition,” Structural Control and Health Monitoring, vol. 16, no. 5, pp. 509–529, 2009. View at Publisher · View at Google Scholar · View at Scopus