Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014, Article ID 418059, 10 pages
http://dx.doi.org/10.1155/2014/418059
Research Article

Study on Effect of Ultrasonic Vibration on Grinding Force and Surface Quality in Ultrasonic Assisted Micro End Grinding of Silica Glass

School of Mechanical Engineering, Hebei University of Technology, Guangrongdao Street, Hongqiao, Tianjin 300130, China

Received 28 February 2014; Revised 20 May 2014; Accepted 11 June 2014; Published 8 July 2014

Academic Editor: Mohammad Elahinia

Copyright © 2014 Zhang Jianhua et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [7 citations]

The following is the list of published articles that have cited the current article.

  • K. Mulenga, B. Guo, Q. Zhao, and X. Fu, “Optimization of machining parameters for ultrasonic assisted vibration-grinding (UAVG) of ultra-low expansion (ULE) optical glass using taguchi method,” 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), pp. 2375–2379, . View at Publisher · View at Google Scholar
  • Zhang Jian-hua, Wang Li-ying, Tian Fu-qiang, Zhao Yan, and Wei Zhi, “Modeling study on surface roughness of ultrasonic-assisted micro end grinding of silica glass,” The International Journal of Advanced Manufacturing Technology, 2015. View at Publisher · View at Google Scholar
  • Chen Jiang, Chunhua Wang, and Haolin Li, “Experimental investigation of brittle material removal fraction on an optical glass surface during ultrasound-assisted grinding,” International Journal of Advanced Manufacturing Technology, vol. 86, no. 1-4, pp. 419–426, 2016. View at Publisher · View at Google Scholar
  • Anil Kumar Jain, and Pulak M. Pandey, “ Experimental investigations of ceramic machining using µ -grinding and µ -rotary ultrasonic machining processes: A comparative study ,” Materials and Manufacturing Processes, vol. 32, no. 6, pp. 598–607, 2016. View at Publisher · View at Google Scholar
  • Zhao Haidong, Zou Ping, Ma Wenbin, and Zhou Zhongming, “A Study on Ultrasonic Elliptical Vibration Cutting of Inconel 718,” Shock and Vibration, vol. 2016, pp. 1–11, 2016. View at Publisher · View at Google Scholar
  • Yusuf S. Dambatta, Ahmed A. D. Sarhan, M. Sayuti, and M. Hamdi, “Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review,” The International Journal of Advanced Manufacturing Technology, 2017. View at Publisher · View at Google Scholar
  • Pulak M. Pandey, and Anil Kumar Jain, “Modeling of un-deformed chip thickness in RUM process and study of size effects in μ-RUM,” Ultrasonics, vol. 77, pp. 1–16, 2017. View at Publisher · View at Google Scholar