Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014 (2014), Article ID 595964, 10 pages
Research Article

A Simplified Flexible Multibody Dynamics for a Main Landing Gear with Flexible Leaf Spring

1Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, 3888, Dong Nanhu Road, Changchun 430033, China
2University of Chinese Academy of Sciences, 19, A Yuquan Road, Beijing 100049, China

Received 5 March 2014; Revised 1 July 2014; Accepted 6 July 2014; Published 23 July 2014

Academic Editor: Hassan Haddadpour

Copyright © 2014 Zhi-Peng Xue et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Supplementary Material

Traditional rigid-flexible systems often take a lot of computer resources to get accurate results. Accuracy and efficiency of computation have been the focus of this research in satisfying the coupling of rigid body and flex body. The method is based on modal analysis and linear theory of elastodynamics: reduced modal datum was used to describe the elastic deformation which was a linear approximate of the flexible part. Then rigid-flexible multibody system was built and the highly nonlinear of the mass matrix caused by the limited rotation of the deformation part was approximated using the linear theory of elastodynamics. The above methods were used to establish the drop system of the leaf spring type landing gear of a small UAV.

  1. Supplementary Vedio