Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2014, Article ID 985602, 17 pages
http://dx.doi.org/10.1155/2014/985602
Research Article

The Seismic Response of High-Speed Railway Bridges Subjected to Near-Fault Forward Directivity Ground Motions Using a Vehicle-Track-Bridge Element

1College of Civil Science and Engineering, Yangzhou University, Yangzhou 225127, China
2National Engineering Laboratory for High-Speed Railway Construction, Central South University, Changsha 410075, China
3School of Civil Engineering, Central South University, Changsha 410075, China
4Department of Civil and Engineering, University of Auckland, Auckland 1142, New Zealand

Received 15 July 2013; Accepted 1 November 2013; Published 27 February 2014

Academic Editor: Vadim V. Silberschmidt

Copyright © 2014 Chen Ling-kun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. G. Somerville, N. F. Smith, R. W. Graves, and N. A. Abrahamson, “Modification of empirical strong ground motion attenuation relations to include the amplitude and duration effects of rupture directivity,” Seismological Research Letters, vol. 68, no. 1, pp. 199–222, 1997. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Benioff, “Mechanism and strain characteristics of the White Wolf fault as indicated by the aftershock sequence,” in Earthquakes in Kern County, California during 1952, Author's Separate, Part II Seismology, Bulletin 171, pp. 199–200, California Department of Natural Resources, Division of Mines, 1955. View at Google Scholar
  3. K. Kasahara, “An attempt to detect azimuth effect on spectral structures of seismicwaves: the Alaskan earthquakes of April 7, 1958,” Bulletin of the Earthquake Research Institute, vol. 38, no. 2, pp. 207–218, 1960. View at Google Scholar
  4. N. A. Haskell, “Total energy and energy spectral density of elastic wave radiation from propagating faults,” Bulletin of the Seismological Society of America A, vol. 54, no. 6, pp. 1811–1842, 1964. View at Google Scholar
  5. A. Ben-Menahem, “Radiation of seismic surface-waves from finite moving sources,” Bulletin of the Seismological Society of America, vol. 51, no. 3, pp. 401–435, 1961. View at Google Scholar
  6. T. H. Heaton, “The 1971 San Fernando earthquake; a double event?” Bulletin of the Seismological Society of America A, vol. 72, no. 6, pp. 2037–2062, 1982. View at Google Scholar
  7. D. M. Boore and R. L. Porcella, “Peak horizontal ground motions from the 1979 Imperial valley earthquake: comparison with data from previous earthquakes,” in Selected Papers on the Imperial Valley, California, Earthquake of October 15, 1979, R. Christopher, Ed., U.S. Geological Survey, Open-File Report, United States Department of the Interior, Geological Survey, Menlo Park, Calif, USA, 1980. View at Google Scholar
  8. D. J. Wald, T. H. Heaton, and K. W. Hudnut, “The slip history of the 1994 Northridge, California, earthquake determined from strong-motion, teleseismic, GPS, and leveling data,” Bulletin of the Seismological Society of America B, vol. 86, no. 1, pp. S49–S70, 1996. View at Google Scholar · View at Scopus
  9. Y.-G. Li, K. Aki, J. E. Vidale, and M. G. Alvarez, “A delineation of the Nojima fault ruptured in the M7.2 Kobe, Japan, earthquake of 1995 using fault zone trapped waves,” Journal of Geophysical Research B, vol. 103, no. 4, pp. 7247–7263, 1998. View at Google Scholar · View at Scopus
  10. W.-C. Chi, D. Dreger, and A. Kaverina, “Finite-source modeling of the 1999 Taiwan (Chi-Chi) earthquake derived from a dense strong-motion network,” Bulletin of the Seismological Society of America, vol. 91, no. 5, pp. 1144–1157, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. S. W. Park, H. Ghasemi, J. Shen, P. G. Somerville, W. P. Yen, and M. Yashinsky, “Simulation of the seismic performance of the Bolu Viaduct subjected to near-fault ground motions,” Earthquake Engineering & Structural Dynamics, vol. 33, no. 13, pp. 1249–1270, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Alavi and H. Krawinkler, “Consideration of near-fault ground motion effects in seismic design,” in Proceedings of the 12th World Conference on Earthquake Engineering, Paper no. 2665, 2000.
  13. H. Choi, M. Saiidi, P. G. Somerville, and S. S. El-Azazy, “Bridge seismic analysis procedure to address near-fault effects,” in Proceedings Caltrans Bridge Research Conference, California Transportation Foundation and California Department of Transportation, Sacramento, Calif, USA, 2005.
  14. A. Mortezaei and H. R. Ronagh, “Plastic hinge length of reinforced concrete columns subjected to both far-fault and near-fault ground motions having forward directivity,” The Structural Design of Tall and Special Buildings, vol. 22, no. 12, pp. 903–926, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. G. A. MacRae, D. V. Morrow, and C. W. Roeder, “Near-fault ground motion effects on simple structures,” Journal of Structural Engineering, vol. 127, no. 9, pp. 996–1004, 2001. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Tothong and C. A. Cornell, “Structural performance assessment under near-source pulse-like ground motions using advanced ground motion intensity measures,” Earthquake Engineering & Structural Dynamics, vol. 37, no. 7, pp. 1013–1037, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. J. W. Baker and C. A. Cornell, “Vector-valued intensity measures for pulse-like near-fault ground motions,” Engineering Structures, vol. 30, no. 4, pp. 1048–1057, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. L. Xu, A. Rodriguez-Marek, and L. Xie, “Design spectra including effect of rupture directivity in near-fault region,” Earthquake Engineering and Engineering Vibration, vol. 5, no. 2, pp. 159–170, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. E. Chioccarelli and I. Iervolino, “Near-source seismic demand and pulse-like records: a discussion for L'Aquila earthquake,” Earthquake Engineering & Structural Dynamics, vol. 39, no. 9, pp. 1039–1062, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. F. Mazza and A. Vulcano, “Nonlinear dynamic response of r.c. framed structures subjected to near-fault ground motions,” Bulletin of Earthquake Engineering, vol. 8, no. 6, pp. 1331–1350, 2010. View at Publisher · View at Google Scholar
  21. L.-K. Chen, L.-Z. Jiang, L.-P. Wang, and B.-F. Luo, “Analysis of elastoplastic seismic response of high-speed railway bridge with round-ended piers,” Journal of South China University of Technology, vol. 39, no. 6, pp. 126–131, 2011 (Chinese). View at Publisher · View at Google Scholar · View at Scopus
  22. L.-K. Chen, L.-Z. Jiang, Z.-W. Yu, and Z.-P. Zeng, “Study on earthquake characteristics of high-speed railway simply-supported girder bridge,” Journal of Vibration and Shock, vol. 30, no. 12, pp. 216–222, 2011 (Chinese). View at Google Scholar · View at Scopus
  23. L. K. Chen, L. Z. Jiang, and Z. Zeng, “Numerical analysis of seismic responses of high-speed railway bridge round-ended piers,” Journal of Hunan University Natural Sciences, vol. 39, no. 4, pp. 19–25, 2012 (Chinese). View at Google Scholar
  24. L. K. Chen, L. Z. Jiang, Z. P. Zeng, and W. G. Long, “Numerical modeling and simulation on seismic performance of high-speed railway bridge system,” Noise and Vibration Worldwide, vol. 42, no. 10, pp. 15–22, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. B. Alavi and H. Krawinkler, “Behavior of moment-resisting frame structures subjected to near-fault ground motions,” Earthquake Engineering & Structural Dynamics, vol. 33, no. 6, pp. 687–706, 2004. View at Publisher · View at Google Scholar · View at Scopus
  26. W.-I. Liao, C.-H. Loh, and B.-H. Lee, “Comparison of dynamic response of isolated and non-isolated continuous girder bridges subjected to near-fault ground motions,” Engineering Structures, vol. 26, no. 14, pp. 2173–2183, 2004. View at Publisher · View at Google Scholar · View at Scopus
  27. W.-I. Liao, C.-H. Loh, S. Wan, W.-Y. Jean, and J.-F. Chai, “Dynamic responses of bridges subjected to near-fault ground motions,” Journal of Chinese Institute of Engineering, vol. 23, no. 4, pp. 455–464, 2000. View at Google Scholar · View at Scopus
  28. Z. Gulerce, E. Erduran, S. K. Kunnath, and N. A. Abrahamson, “Seismic demand models for probabilistic risk analysis of near fault vertical ground motion effects on ordinary highway bridges,” Earthquake Engineering & Structural Dynamics, vol. 41, no. 2, pp. 159–175, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Z. Ju, G. P. Yan, and L. Liu, “Experimental study on seismic behaviors of large-scale RC round-ended piers with low reinforcement ratio,” China Civil Engineering Journal, vol. 36, no. 11, pp. 66–69, 2003 (Chinese). View at Google Scholar
  30. J. Shen, M.-H. Tsai, K.-C. Chang, and G. C. Lee, “Performance of a seismically isolated bridge under near-fault earthquake ground motions,” ASCE Journal of Structural Engineering, vol. 130, no. 6, pp. 861–868, 2004. View at Publisher · View at Google Scholar · View at Scopus
  31. G. L. Dai, W. S. Liu, and L. Y. Li, “Study of the live load for small-and medium-span bridges of high-speed railways,” China Civil Engineering Journal, vol. 45, no. 10, pp. 161–168, 2012 (Chinese). View at Google Scholar
  32. N. Zhang and H. Xia, “Dynamic analysis of coupled vehicle-bridge system based on inter-system iteration method,” Computers & Structures, vol. 114-115, pp. 26–34, 2013. View at Publisher · View at Google Scholar
  33. M. M. Gao and J. Y. Pan, “Coupling vibration analysis for train-track-bridge system,” in Proceedings of the 6th European Conference on Structural Dynamics (EURODYN '05), Paris, France, 2005.
  34. X. Z. Li, W. B. Ma, and S. Z. Qiang, “Coupling vibration analysis of vehicle-bridge system by iterative solution method,” Journal of Vibration and Shock, vol. 21, no. 3, pp. 21–25, 2002 (Chinese). View at Google Scholar · View at Scopus
  35. J.-S. Jo, H.-J. Jung, and H. Kim, “Finite element analysis of vehicle-bridge interaction by an iterative method,” Structural Engineering & Mechanics, vol. 30, no. 2, pp. 165–176, 2008. View at Google Scholar · View at Scopus
  36. Y. B. Yang and Y. S. Wu, “A versatile element for analyzing vehicle-bridge interaction response,” Engineering Structures, vol. 23, no. 5, pp. 452–469, 2001. View at Publisher · View at Google Scholar
  37. Y. K. Cheung, F. T. K. Au, D. Y. Zheng, and Y. S. Cheng, “Vibration of multispan non-uniform bridges under moving vehicles and trains by using modified beam vibration functions,” Journal of Sound and Vibration, vol. 228, no. 3, pp. 611–628, 1999. View at Google Scholar · View at Scopus
  38. H. Xia, Y. Han, N. Zhang, and W. W. Guo, “Dynamic analysis of train-bridge system subjected to non-uniform seismic excitations,” Earthquake Engineering & Structural Dynamics, vol. 35, no. 12, pp. 1563–1579, 2006. View at Publisher · View at Google Scholar · View at Scopus
  39. J. C. O. Nielsen and T. J. S. Abrahamsson, “Coupling of physical and modal components for analysis of moving non-linear dynamic systems on general beam structures,” International Journal for Numerical Methods in Engineering, vol. 33, no. 9, pp. 1843–1859, 1992. View at Publisher · View at Google Scholar
  40. J.-D. Yau, Y.-B. Yang, and S.-R. Kuo, “Impact response of high speed rail bridges and riding comfort of rail cars,” Engineering Structures, vol. 21, no. 9, pp. 836–844, 1999. View at Google Scholar · View at Scopus
  41. C. Jiang and Z. M. Lin, “Test and research on the ballast-free track structure for high-speed railway,” Chinese Railways, vol. 7, pp. 22–24, 2000 (Chinese). View at Google Scholar
  42. E. S. Hwang and A. S. Nowak, “Simulation of dynamic load for bridges,” ASCE Journal of Structural Engineering, vol. 117, no. 5, pp. 1413–1434, 1991. View at Publisher · View at Google Scholar
  43. F. Yang and G. A. Fonder, “An iterative solution method for dynamic response of bridge-vehicles systems,” Earthquake Engineering & Structural Dynamics, vol. 25, no. 2, pp. 195–215, 1996. View at Google Scholar · View at Scopus
  44. L. K. Chen, Seismic responses of high-speed railway train-ballastless track-bridge system and train-running safety during earthquake [Ph.D. thesis], Central South University, Changsha, China, 2012, (Chinese).
  45. L. K. Chen, L. Z. Jiang, and P. Liu, “Seismic response analyses of high-speed railway bridge round-ended piers using global bridge model,” International Journal of Materials and Product Technology, vol. 44, no. 1-2, pp. 35–46, 2012. View at Publisher · View at Google Scholar
  46. Q. Fu and C. Menun, “Seismic-environment-based simulation of near-fault ground motions,” in Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, 2004.
  47. S. Akkar, U. Yazgan, and P. Gülkan, “Drift estimates in frame buildings subjected to near-fault ground motions,” Journal of Structural Engineering, vol. 131, no. 7, pp. 1014–1024, 2005. View at Publisher · View at Google Scholar · View at Scopus
  48. J. W. Baker, “Quantitative classification of near-fault ground motions using wavelet analysis,” Bulletin of the Seismological Society of America, vol. 97, no. 5, pp. 1486–1501, 2007. View at Publisher · View at Google Scholar · View at Scopus
  49. F. Mazza and A. Vulcano, “Effects of near-fault ground motions on the nonlinear dynamic response of base-isolated r.c. framed buildings,” Earthquake Engineering & Structural Dynamics, vol. 41, no. 2, pp. 211–232, 2012. View at Publisher · View at Google Scholar · View at Scopus
  50. Federal Emergency Management Agency, NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, FEMA 450, FEMA, Washington, DC, USA, 2003.
  51. B. Alavi and H. Krawinkler, “Effects of near-fault ground motions on frame structures,” John A. Blume Earthquake Engineering Center Report 138, Stanford University, 2001. View at Google Scholar
  52. Pacific Earthquake Engineering Center (PEER), “PEER Strong Ground Motion Database,” http://peer.berkeley.edu/products/strong_ground_motion_db.html.
  53. E. Kalkan and S. K. Kunnath, “Effects of fling step and forward directivity on seismic response of buildings,” Earthquake Spectra, vol. 22, no. 2, pp. 367–390, 2006. View at Publisher · View at Google Scholar · View at Scopus
  54. A. J. Papazoglou and A. S. Elnashai, “Analytical and field evidence of the damaging effect of vertical earthquake ground motion,” Earthquake Engineering & Structural Dynamics, vol. 25, no. 10, pp. 1109–1137, 1996. View at Google Scholar · View at Scopus
  55. D. Benedetti and P. Carydis, “Influence of the vertical component on damage during shallow—near field earthquakes,” European Earthquake Engineering, vol. 3, pp. 3–12, 1999. View at Google Scholar
  56. F. Mazza and A. Vulcano, “Nonlinear dynamic response of r.c. framed structures subjected to near-fault ground motions,” Bulletin of Earthquake Engineering, vol. 8, no. 6, pp. 1331–1350, 2010. View at Publisher · View at Google Scholar · View at Scopus
  57. F. Mollaioli, A. Lucchini, Y. Cheng, and G. Monti, “Cheng and G. Monti, Intensity measures for the seismic response prediction of base-isolated buildings,” Bulletin of Earthquake Engineering, vol. 11, no. 5, pp. 1841–1866, 2013. View at Publisher · View at Google Scholar · View at Scopus
  58. GB 50011-2001, Code for Seismic Design of Building, China Architecture and Building Press, Beijing, China, 2008, (Chinese).
  59. GB 50011-2010, Code for Seismic Design of Buildings, China Building Industry Press, Beijing, China, 2010, (Chinese).
  60. FEMA-356, Prestandard and Commentary for Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, DC, USA, 2000.
  61. J. Zheng, “Key technologies for high-speed railway bridge construction,” Engineering Science, vol. 10, no. 7, pp. 18–27, 2008 (Chinese). View at Google Scholar
  62. Temporary Provisions of Newly-Built 300-350km/H Passenger Special Railway Bridge Design[S], China Railway Press, Beijing, China, 2007, (Chinese).
  63. C. B. Chadwell, UCFYBER: Cross Section Analysis Structural Software, Department of Civil and Environmental Engineering, University of California, Berkeley, Calif, USA, 1999.
  64. J. Mander, M. Priestley, and R. Park, “Theoretical stress-strain model for confined concrete,” ASCE Journal of Structural Engineering, vol. 114, no. 8, pp. 1804–1826, 1988. View at Google Scholar · View at Scopus
  65. FEMA, “Quantification of building seismic performance factors,” FEMA P695, Applied Technology Council for the Federal Emergency Management Agency, Washington, DC, USA, 2009. View at Google Scholar
  66. ASCE, “Minimum design loads for buildings and other structures,” ASCE/SEI 7-05, American Society of Civil Engineers, Reston, Va, USA, 2006. View at Google Scholar
  67. N. M. Newmark, J. A. Blume, and K. K. Kapur, “Seismic design spectra for nuclear power plants,” ASCE Journal of the Power Division, vol. 99, no. 2, pp. 287–303, 1973. View at Google Scholar · View at Scopus
  68. A. S. Elnashai and A. J. Papazoglou, “Vertical earthquake ground motion: evidence, effects and simplified analysis procedures,” ESEE 95-06, Civil Engineering Department, Imperial College, London, UK, 1995. View at Google Scholar