Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015 (2015), Article ID 193136, 12 pages
http://dx.doi.org/10.1155/2015/193136
Research Article

Nonlinear Regression Based Health Monitoring of Hysteretic Structures under Seismic Excitation

1School of Astronautics, Northwestern Polytechnical University, Xi’an 710072, China
2Department of Mechanical Engineering, University of Canterbury, Private Bag 4800, Christchurch 8140, New Zealand

Received 19 March 2015; Revised 25 June 2015; Accepted 29 June 2015

Academic Editor: Mickaël Lallart

Copyright © 2015 C. Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Naeim, “Real-time damage detection and performance evaluation for buildings,” in Earthquakes and Health Monitoring of Civil Structures, pp. 167–196, Springer, Dordrecht, The Netherlands, 2013. View at Publisher · View at Google Scholar
  2. G. Hearn and R. B. Testa, “Modal analysis for damage detection in structures,” Journal of Structural Engineering, vol. 117, no. 10, pp. 3042–3063, 1991. View at Publisher · View at Google Scholar
  3. S. W. Doebling, C. R. Farrar, and M. B. Prime, “A summary review of vibration-based damage identification methods,” Shock and Vibration Digest, vol. 30, no. 2, pp. 91–105, 1998. View at Publisher · View at Google Scholar · View at Scopus
  4. B. Peeters, J. Maeck, and G. De Roeck, “Vibration-based damage detection in civil engineering: excitation sources and temperature effects,” Smart Materials and Structures, vol. 10, no. 3, article 518, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. J. M. Ko and Y. Q. Ni, “Technology developments in structural health monitoring of large-scale bridges,” Engineering Structures, vol. 27, no. 12, pp. 1715–1725, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. P. C. Chang, A. Flatau, and S. C. Liu, “Review paper: health monitoring of civil infrastructure,” Structural Health Monitoring, vol. 2, no. 3, pp. 257–267, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. G. Park, H. H. Cudney, and D. J. Inman, “Impedance-based health monitoring of civil structural components,” Journal of Infrastructure Systems (ASCE), vol. 6, no. 4, pp. 153–160, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Raghavan and C. E. S. Cesnik, “Review of guided-wave structural health monitoring,” The Shock and Vibration Digest, vol. 39, no. 2, pp. 91–114, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Hou, M. Noori, and R. S. Amand, “Wavelet-based approach for structural damage detection,” Journal of Engineering Mechanics, vol. 126, no. 7, pp. 677–683, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. J. N. Yang, Y. Lei, S. Lin, and N. Huang, “Hilbert-Huang based approach for structural damage detection,” Journal of Engineering Mechanics, vol. 130, no. 1, pp. 85–95, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. J.-S. Lin and Y. G. Zhang, “Nonlinear structural identification using extended Kalman filter,” Computers and Structures, vol. 52, no. 4, pp. 757–764, 1994. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Sato and K. Qi, “Adaptive H filter: its application to structural identification,” Journal of Engineering Mechanics, vol. 124, no. 11, pp. 1233–1240, 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. C.-H. Loh, C.-Y. Lin, and C.-C. Huang, “Time domain identification of frames under earthquake loadings,” Journal of Engineering Mechanics, vol. 126, no. 7, pp. 693–703, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. J. G. Chase, K. L. Hwang, L. R. Barroso, and J. B. Mander, “A simple LMS-based approach to the structural health monitoring benchmark problem,” Earthquake Engineering and Structural Dynamics, vol. 34, no. 6, pp. 575–594, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. J. G. Chase, H. A. Spieth, C. F. Blome, and J. B. Mander, “LMS-based structural health monitoring of a non-linear rocking structure,” Earthquake Engineering and Structural Dynamics, vol. 34, no. 8, pp. 909–930, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. J. N. Yang, S. L. Lin, H. W. Huang, and L. Zhou, “An adaptive extended Kalman filter for structural damage identification,” Structural Control and Health Monitoring, vol. 13, no. 4, pp. 849–867, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Wu and A. W. Smyth, “Application of the unscented Kalman filter for real-time nonlinear structural system identification,” Structural Control and Health Monitoring, vol. 14, no. 7, pp. 971–990, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Chen and M. Q. Feng, “Structural health monitoring by recursive bayesian filtering,” Journal of Engineering Mechanics, vol. 135, no. 4, pp. 231–242, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Nayyerloo, J. G. Chase, G. A. MacRae, and X.-Q. Chen, “Lms-based approach to structural health monitoring of nonlinear hysteretic structures,” Structural Health Monitoring, vol. 10, no. 4, pp. 429–444, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. C. Christopoulos, S. Pampanin, and M. J. N. Priestley, “Performance-based seismic response of frame structures including residual deformations, part I: single-degree of freedom systems,” Journal of Earthquake Engineering, vol. 7, no. 1, pp. 97–118, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Pampanin, C. Christopoulos, and M. J. N. Priestley, “Performance-based seismic response of frame structures including residual deformations. Part II: multi-degree of freedom systems,” Journal of Earthquake Engineering, vol. 7, no. 1, pp. 119–147, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. J. E. Stephens and J. T. P. Yao, “Damage assessment using response measurements,” Journal of Structural Engineering, vol. 113, no. 4, pp. 787–801, 1987. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Toussi and J. T. P. Yao, “Hysteresis identification of existing structures,” Journal of Engineering Mechanics, vol. 109, no. 5, pp. 1189–1202, 1983. View at Publisher · View at Google Scholar · View at Scopus
  24. W. D. Iwan and A. O. Cifuentes, “A model for system identification of degrading structures,” Earthquake Engineering and Structural Dynamics, vol. 14, no. 6, pp. 877–890, 1986. View at Publisher · View at Google Scholar · View at Scopus
  25. S. R. Subia and M. L. Wang, “Nonlinear hysteresis curve derived by direct numerical investigation of acceleration data,” Soil Dynamics and Earthquake Engineering, vol. 14, no. 5, pp. 321–330, 1995. View at Publisher · View at Google Scholar · View at Scopus
  26. W.-S. Chan, Y.-L. Xu, X.-L. Ding, Y.-L. Xiong, and W.-J. Dai, “Assessment of dynamic measurement accuracy of GPS in three directions,” Journal of Surveying Engineering, vol. 132, no. 3, pp. 108–117, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Smyth and M. L. Wu, “Multi-rate Kalman filtering for the data fusion of displacement and acceleration response measurements in dynamic system monitoring,” Mechanical Systems and Signal Processing, vol. 21, no. 2, pp. 706–723, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. C. E. Hann, I. Singh-Levett, B. L. Deam, J. B. Mander, and J. G. Chase, “Real-time system identification of a nonlinear four-story steel frame structure—application to structural health monitoring,” IEEE Sensors Journal, vol. 9, no. 11, pp. 1339–1346, 2009. View at Publisher · View at Google Scholar · View at Scopus
  29. H. S. Lee, Y. H. Hong, and H. W. Park, “Design of an FIR filter for the displacement reconstruction using measured acceleration in low-frequency dominant structures,” International Journal for Numerical Methods in Engineering, vol. 82, no. 4, pp. 403–434, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  30. Y. H. Hong, S. G. Lee, and H. S. Lee, “Design of the FEM-FIR filter for displacement reconstruction using accelerations and displacements measured at different sampling rates,” Mechanical Systems and Signal Processing, vol. 38, no. 2, pp. 460–481, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. A. O. Cifuentes and W. D. Iwan, “Nonlinear system identification based on modelling of restoring force behaviour,” Soil Dynamics and Earthquake Engineering, vol. 8, no. 1, pp. 2–8, 1989. View at Publisher · View at Google Scholar · View at Scopus
  32. D. Benedetti and M. P. Limongelli, “A model to estimate the virgin and ultimate effective stiffnesses from the response of a damaged structure to a single earthquake,” Earthquake Engineering & Structural Dynamics, vol. 25, no. 10, pp. 1095–1108, 1996. View at Publisher · View at Google Scholar · View at Scopus
  33. W. D. Iwan, “R-SHAPE: a real-time structural health and performance evaluation system,” in Proceedings of the US-Europe Workshop on Sensors and Smart Structures Technology, pp. 33–38, 2002.
  34. K. Worden, “Data processing and experiment design for the restoring force surface method, part I: integration and differentiation of measured time data,” Mechanical Systems and Signal Processing, vol. 4, no. 4, pp. 295–319, 1990. View at Publisher · View at Google Scholar · View at Scopus
  35. F. L. Lewis, L. Xie, and D. Popa, Optimal and Robust Estimation: With an Introduction to Stochastic Control Theory, CRC Press, 2008.
  36. G. A. F. Seber and A. J. Lee, Linear Regression Analysis, John Wiley & Sons, 2012.
  37. J. D. Hodon, “Fitting segmented surveys whose join points have to be estimated,” Journal of the American Statistical Association, vol. 61, pp. 1097–1129, 1966. View at Google Scholar
  38. P. M. Lerman, “Fitting segmented regression models by grid search,” Journal of the Royal Statistical Society, Series C: Applied Statistics, vol. 29, no. 1, pp. 77–84, 1980. View at Publisher · View at Google Scholar
  39. J. Cologne and R. Sposto, “Smooth piecewise linear regression splines with hyperbolic covariates,” Journal of Applied Statistics, vol. 21, no. 4, pp. 221–233, 1994. View at Publisher · View at Google Scholar
  40. E. Stoimenova, M. Datcheva, and T. Schanz, “Application of two-phase regression to geotechnical data,” Pliska Studia Mathematica Bulgarica, vol. 16, pp. 245–257, 2004. View at Google Scholar · View at MathSciNet