Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 286139, 16 pages
http://dx.doi.org/10.1155/2015/286139
Review Article

A Review of Indirect Bridge Monitoring Using Passing Vehicles

1School of Civil, Structural & Environmental Engineering, University College Dublin, Newstead, Belfield, Dublin 4, Ireland
2SPACE, Queen’s University Belfast, David Keir Building, Belfast BT9 5AG, UK

Received 23 October 2014; Revised 11 December 2014; Accepted 14 December 2014

Academic Editor: Mickaël Lallart

Copyright © 2015 Abdollah Malekjafarian et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. L. Davis and D. Goldberg, The Fix We're In For: The State of Our Nation's Bridges 2013, Transportation for America, Washington, DC, USA, 2013.
  2. A. Žnidarič, V. Pakrashi, E. O'Brien, and A. O'Connor, “A review of road structure data in six European countries,” Proceedings of the ICE: Urban Design and Planning, vol. 164, no. 4, pp. 225–232, 2011. View at Google Scholar · View at Scopus
  3. P. Chupanit and C. Phromsorn, “The importance of bridge health monitoring,” International Science Index, vol. 6, pp. 135–138, 2012. View at Google Scholar
  4. Y. Fujino and D. M. Siringoringo, “Bridge monitoring in Japan: the needs and strategies,” Structure and Infrastructure Engineering, vol. 7, no. 7-8, pp. 597–611, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Akgül, “A BMS development project with an integrated inspection program,” in Bridge Maintenance, Safety, Management, Resilience and Sustainability, chapter 360, pp. 2659–2665, CRC Press, New York, NY, USA, 2012. View at Publisher · View at Google Scholar
  6. A. Rytter, Vibration Based Inspection of Civil Engineering Structures, Aalborg University, Aalborg, Denmark, 1993.
  7. E. P. Carden and P. Fanning, “Vibration based condition monitoring: a review,” Structural Health Monitoring, vol. 3, no. 4, pp. 355–377, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Fan and P. Z. Qiao, “Vibration-based damage identification methods: a review and comparative study,” Structural Health Monitoring, vol. 10, no. 1, pp. 83–111, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. H. C. Gomez, P. J. Fanning, M. Q. Feng, and S. Lee, “Testing and long-term monitoring of a curved concrete box girder bridge,” Engineering Structures, vol. 33, no. 10, pp. 2861–2869, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. Y.-B. Yang, C. W. Lin, and J. D. Yau, “Extracting bridge frequencies from the dynamic response of a passing vehicle,” Journal of Sound and Vibration, vol. 272, no. 3-5, pp. 471–493, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. Y. B. Yang and C. W. Lin, “Vehicle-bridge interaction dynamics and potential applications,” Journal of Sound and Vibration, vol. 284, no. 1-2, pp. 205–226, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. C. W. Lin and Y. B. Yang, “Use of a passing vehicle to scan the fundamental bridge frequencies: an experimental verification,” Engineering Structures, vol. 27, no. 13, pp. 1865–1878, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. P. J. McGetrick, A. González, and E. J. OBrien, “Theoretical investigation of the use of a moving vehicle to identify bridge dynamic parameters,” Insight, vol. 51, no. 8, pp. 433–438, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Zhang, L. Q. Wang, and Z. H. Xiang, “Damage detection by mode shape squares extracted from a passing vehicle,” Journal of Sound and Vibration, vol. 331, no. 2, pp. 291–307, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. B. Yang, Y. C. Li, and K. C. Chang, “Constructing the mode shapes of a bridge from a passing vehicle: a theoretical study,” Smart Structures and Systems, vol. 13, no. 5, pp. 797–819, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Keenahan, P. McGetrick, E. J. O'Brien, and A. González, “Using instrumented vehicles to detect damage in bridges,” in Proceedings of the 15th International Conference on Experimental Mechanics, Porto, Portugal, 2012.
  17. K. V. Nguyen and H. T. Tran, “Multi-cracks detection of a beam-like structure based on the on-vehicle vibration signal and wavelet analysis,” Journal of Sound and Vibration, vol. 329, no. 21, pp. 4455–4465, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Khorram, F. Bakhtiari-Nejad, and M. Rezaeian, “Comparison studies between two wavelet based crack detection methods of a beam subjected to a moving load,” International Journal of Engineering Science, vol. 51, pp. 204–215, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. X. Kong, C. S. Cai, and B. Kong, “Damage detection based on transmissibility of a vehicle and bridge coupled system,” Journal of Engineering Mechanics, vol. 141, no. 1, Article ID 04014102, 2015. View at Publisher · View at Google Scholar
  20. A. González, “Vehicle-bridge dynamic interaction using finite element modelling,” in Finite Element Analysis, pp. 637–662, Sciyo, Rijeka, Croatia, 2010. View at Publisher · View at Google Scholar
  21. A. González, E. J. OBrien, and P. J. McGetrick, “Detection of bridge dynamic parameters using an instrumented vehicle,” in Proceedings of the 5th World Conference on Structural Control and Monitoring, Tokyo, Japan, 2010.
  22. A. González, E. J. OBrien, and P. J. McGetrick, “Identification of damping in a bridge using a moving instrumented vehicle,” Journal of Sound and Vibration, vol. 331, no. 18, pp. 4115–4131, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Keenahan, E. J. OBrien, P. J. McGetrick, and A. Gonzalez, “The use of a dynamic truck-trailer drive-by system to monitor bridge damping,” Structural Health Monitoring, vol. 13, no. 2, pp. 143–157, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Oshima, Y. Kobayashi, T. Yamaguchi, and K. Sugiura, “Eigenfrequency estimation for bridges using the response of a passing vehicle with excitation system,” in Proceedings of the 4th International Conference on Bridge Maintenance (IABMAS '08), 3037, p. 3030, Seoul, Republic of Korea, July 2008. View at Scopus
  25. Y. Oshima, K. Yamamoto, K. Sugiura, and T. Yamaguchi, “Estimation of bridge eigenfrequencies based on vehicle responses using ICA,” in Proceedings of the 10th International Conference on Structural Safety and Reliability (ICOSSAR '09), Osaka, Japan, September 2009.
  26. Y. B. Yang and K. C. Chang, “Extracting the bridge frequencies indirectly from a passing vehicle: parametric study,” Engineering Structures, vol. 31, no. 10, pp. 2448–2459, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. B. Yang and K. C. Chang, “Extraction of bridge frequencies from the dynamic response of a passing vehicle enhanced by the EMD technique,” Journal of Sound and Vibration, vol. 322, no. 4-5, pp. 718–739, 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. C. W. Kim, R. Isemoto, T. Toshinami, M. Kawatani, P. J. McGetrick, and E. J. O'Brien, “Experimental investigation of drive-by bridge inspection,” in Proceedings of the 5th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-5 '11), Cancun, Mexico, December 2011. View at Scopus
  29. T. Toshinami, M. Kawatani, and C. W. Kim, “Feasibility investigation for identifying bridge's fundamental frequencies from vehicle vibrations,” in Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management (IABMAS '10), pp. 317–322, Philadelphia, Pa, USA, July 2010. View at Scopus
  30. D. M. Siringoringo and Y. Fujino, “Estimating bridge fundamental frequency from vibration response of instrumented passing vehicle: analytical and experimental study,” Advances in Structural Engineering, vol. 15, no. 3, pp. 417–433, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Fujino, K. Kitagawa, T. Furukawa, and H. Ishii, “Development of vehicle intelligent monitoring system (VIMS),” in Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 5765 of Proceedings of SPIE, pp. 148–157, March 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. Y. B. Yang, K. C. Chang, and Y. C. Li, “Filtering techniques for extracting bridge frequencies from a test vehicle moving over the bridge,” Engineering Structures, vol. 48, pp. 353–362, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. W.-M. Li, Z.-H. Jiang, T.-L. Wang, and H.-P. Zhu, “Optimization method based on Generalized Pattern Search Algorithm to identify bridge parameters indirectly by a passing vehicle,” Journal of Sound and Vibration, vol. 333, no. 2, pp. 364–380, 2014. View at Publisher · View at Google Scholar · View at Scopus
  34. A. Malekjafarian and E. J. OBrien, “Application of output-only modal method to the monitoring of bridges using an instrumented vehicle,” in Civil Engineering Research in Ireland, S. Nanukuttan and J. Goggins, Eds., Belfast, Belfast, Northern Ireland, 2014. View at Google Scholar
  35. Y. B. Yang, M. C. Cheng, and K. C. Chang, “Frequency variation in vehicle-bridge interaction systems,” International Journal of Structural Stability and Dynamics, vol. 13, no. 2, Article ID 1350019, 2013. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  36. K. C. Chang and C. W. Kim, “Variability in bridge frequency induced by a parked vehicle,” in Proceedings of the 4th KKCNN Symposium on Civil Engineering, pp. 75–79, Hyogo, Japan, 2011.
  37. Y.-B. Yang, W.-F. Chen, H.-W. Yu, and C. S. Chan, “Experimental study of a hand-drawn cart for measuring the bridge frequencies,” Engineering Structures, vol. 57, pp. 222–231, 2013. View at Publisher · View at Google Scholar · View at Scopus
  38. R. O. Curadelli, J. D. Riera, D. Ambrosini, and M. G. Amani, “Damage detection by means of structural damping identification,” Engineering Structures, vol. 30, no. 12, pp. 3497–3504, 2008. View at Publisher · View at Google Scholar · View at Scopus
  39. C. Modena, D. Sonda, and D. Zonta, “Damage localization in reinforced concrete structures by using damping measurements,” Key Engineering Materials, vol. 167, no. 1, pp. 132–141, 1999. View at Google Scholar · View at Scopus
  40. P. McGetrick, C. W. Kim, and E. J. OBrien, “Experimental investigation of the detection of bridge dynamic parameters using a moving vehicle,” in Proceedings of the 23rd KKCNN Symposium on Civil Engineering, Taipei, Taiwan, 2010.
  41. C. W. Kim, R. Isemoto, P. J. Mcgetrick, M. Kawatani, and E. J. Obrien, “Drive-by bridge inspection from three different approaches,” Smart Structures and Systems, vol. 13, no. 5, pp. 775–796, 2014. View at Publisher · View at Google Scholar · View at Scopus
  42. C. Williams and O. S. Salawu, “Damping as a damage indication parameter,” in Proceedings of the 15th International Modal Analysis Conference (IMAC '97), pp. 1531–1536, Orlando, Fla, USA, February 1997. View at Scopus
  43. X. Q. Zhu and S. S. Law, “Wavelet-based crack identification of bridge beam from operational deflection time history,” International Journal of Solids and Structures, vol. 43, no. 7-8, pp. 2299–2317, 2006. View at Publisher · View at Google Scholar · View at Scopus
  44. A. K. Pandey, M. Biswas, and M. M. Samman, “Damage detection from changes in curvature mode shapes,” Journal of Sound and Vibration, vol. 145, no. 2, pp. 321–332, 1991. View at Publisher · View at Google Scholar · View at Scopus
  45. V. Arora, S. P. Singh, and T. K. Kundra, “Damped model updating using complex updating parameters,” Journal of Sound and Vibration, vol. 320, no. 1-2, pp. 438–451, 2009. View at Publisher · View at Google Scholar · View at Scopus
  46. Y. Oshima, K. Yamamoto, and K. Sugiura, “Damage assessment of a bridge based on mode shapes estimated by responses of passing vehicles,” Smart Structures and Systems, vol. 13, no. 5, pp. 731–753, 2014. View at Publisher · View at Google Scholar · View at Scopus
  47. A. Malekjafarian and E. J. OBrien, “Identification of bridge mode shapes using short time frequency domain decomposition of the responses measured in a passing vehicle,” Engineering Structures, vol. 81, pp. 386–397, 2014. View at Publisher · View at Google Scholar
  48. Y. B. Yang, Y. C. Li, and K. C. Chang, “Effect of road surface roughness on the response of a moving vehicle for identification of bridge frequencies,” Interaction and Multiscale Mechanics, vol. 5, no. 4, pp. 347–368, 2012. View at Publisher · View at Google Scholar
  49. Y. B. Yang, Y. C. Lee, and K. C. Chang, “Effect of road surface roughness on extraction of bridge frequencies by moving vehicle,” in Mechanics and Model-Based Control of Advanced Engineering Systems, pp. 295–305, Springer, Vienna, Austria, 2014. View at Publisher · View at Google Scholar
  50. Y. B. Yang, Y. C. Li, and K. C. Chang, “Using two connected vehicles to measure the frequencies of bridges with rough surface: a theoretical study,” Acta Mechanica, vol. 223, no. 8, pp. 1851–1861, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  51. A. González, E. J. O'Brien, Y.-Y. Li, and K. Cashell, “The use of vehicle acceleration measurements to estimate road roughness,” Vehicle System Dynamics, vol. 46, no. 6, pp. 483–499, 2008. View at Publisher · View at Google Scholar · View at Scopus
  52. J. Q. Bu, S. S. Law, and X. Q. Zhu, “Innovative bridge condition assessment from dynamic response of a passing vehicle,” Journal of Engineering Mechanics, vol. 132, no. 12, pp. 1372–1379, 2006. View at Publisher · View at Google Scholar · View at Scopus
  53. C. W. Kim and M. Kawatani, “Challenge for a drive-by bridge inspection,” in Proceedings of the 10th International Conference on Structural Safety and Reliability (ICOSSAR '09), pp. 758–765, Osaka, Japan, 2009.
  54. P. J. McGetrick, The use of an instrumented vehicle to monitor transport infrastructure [Ph.D. thesis], University College Dublin, Dublin, Ireland, 2012.
  55. Y. Zhang, S. T. Lie, and Z. H. Xiang, “Damage detection method based on operating deflection shape curvature extracted from dynamic response of a passing vehicle,” Mechanical Systems and Signal Processing, vol. 35, no. 1-2, pp. 238–254, 2013. View at Publisher · View at Google Scholar · View at Scopus
  56. S.-H. Yin and C.-Y. Tang, “Identifying cable tension loss and deck damage in a cable-stayed bridge using a moving vehicle,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 133, no. 2, Article ID 021007, 2011. View at Publisher · View at Google Scholar · View at Scopus
  57. A. Miyamoto and A. Yabe, “Bridge condition assessment based on vibration responses of passenger vehicle,” Journal of Physics: Conference Series, vol. 305, no. 1, Article ID 012103, 2011. View at Publisher · View at Google Scholar · View at Scopus
  58. A. Miyamoto and A. Yabe, “Development of practical health monitoring system for short- and medium-span bridges based on vibration responses of city bus,” Journal of Civil Structural Health Monitoring, vol. 2, no. 1, pp. 47–63, 2012. View at Publisher · View at Google Scholar · View at Scopus
  59. A. Yabe, A. Miyamoto, S. Isoda, and N. Tani, “Development of bridge monitoring system for short- and medium-span bridges based on bus vibration,” Journal of Japan Society of Civil Engineers, Series F4 (Construction and Management), vol. 69, no. 2, pp. 102–120, 2013. View at Publisher · View at Google Scholar
  60. Z. H. Li and F. T. K. Au, “Damage detection of a continuous bridge from response of a moving vehicle,” Shock and Vibration, vol. 2014, Article ID 146802, 7 pages, 2014. View at Publisher · View at Google Scholar
  61. Z. Li and F. T. K. Au, “Damage detection of bridges using response of vehicle considering road surface roughness,” International Journal of Structural Stability and Dynamics, 2014. View at Publisher · View at Google Scholar
  62. F. Cerda, J. Garrett, J. Bielak et al., “Indirect structural health monitoring in bridges: scale experiments,” in Bridge Maintenance, Safety, Management, Resilience and Sustainability, pp. 346–353, 2012. View at Google Scholar
  63. F. Cerda, S. Chen, J. Bielak, J. H. Garrett, P. Rizzo, and J. KovaČević, “Indirect structural health monitoring of a simplified laboratory-scale bridge model,” Smart Structures and Systems, vol. 13, no. 5, pp. 849–868, 2014. View at Publisher · View at Google Scholar · View at Scopus
  64. G. Lederman, Z. Wang, J. Bielak et al., “Damage quantification and localization algorithms for indirect SHM of bridges,” in Bridge Maintenance, Safety, Management and Life Extension, chapter 83, pp. 640–647, CRC Press, New York, NY, USA, 2014. View at Publisher · View at Google Scholar
  65. S. H. Chen, F. Cerda, P. Rizzo, J. Bielak, J. H. Garrett, and J. Kovacevic, “Semi-supervised multiresolution classification using adaptive graph filtering with application to indirect bridge structural health monitoring,” IEEE Transactions on Signal Processing, vol. 62, pp. 2879–2893, 2014. View at Google Scholar
  66. H.-C. Tsai, C.-Y. Wang, N. E. Huang, T.-W. Kuo, and W.-H. Chieng, “Railway track inspection based on the vibration response to a scheduled train and the Hilbert-Huang transform,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2014. View at Publisher · View at Google Scholar
  67. P. J. McGetrick and C. W. Kim, “A parametric study of a drive by bridge inspection system based on the Morlet wavelet,” Key Engineering Materials, vol. 569-570, pp. 262–269, 2013. View at Publisher · View at Google Scholar · View at Scopus
  68. P. J. McGetrick and C. W. Kim, “An indirect bridge inspection method incorporating a wavelet-based damage indicator and pattern recognition,” in Proceedings of the 9th International Conference on Structural Dynamics (EURODYN '14), Porto, Portugal, July 2014.
  69. P. McGetrick and C. A. Kim, “A wavelet based drive-by bridge inspection system,” in Proceedings of the 7th International Conference on Bridge Maintenance Safety and Management (IABMAS '14), Shanghai, China, 2014.
  70. R. C. Briggs, R. F. Johnson, R. N. Stubstad, and L. Pierce, “A comparison of the rolling weight deflectometer with the falling weight deflectometer,” American Society for Testing and Materials, vol. 1375, pp. 444–456, 2000. View at Google Scholar
  71. G. W. Flintsch, B. Ferne, B. Diefenderfer, S. Katicha, J. Bryce, and S. Nell, “Evaluation of Traffic Speed Continuous Deflection Devices,” in Proceedings of the 91st Annual Meeting, Transport Research Board, Washington, DC , USA, January 2012.
  72. J. Keenahan and E. J. OBrien, “Allowing for a rocking datum in the analysis of drive-by bridge inspections,” in Civil Engineering Research in Ireland, S. Nanukuttan and J. Goggins, Eds., pp. 117–124, Belfast, UK, 2014. View at Google Scholar
  73. E. J. OBrien and J. Keenahan, “Drive-by damage detection in bridges using the apparent profile,” Structural Control and Health Monitoring, 2014. View at Publisher · View at Google Scholar