Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 290293, 13 pages
http://dx.doi.org/10.1155/2015/290293
Research Article

Experimental Study on Anisotropic Strength and Deformation Behavior of a Coal Measure Shale under Room Dried and Water Saturated Conditions

1School of Mines, Key Laboratory of Deep Coal Resource Mining, Ministry of Education of China, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China
2Department of Mining Engineering, West Virginia University, Morgantown, WV 26505, USA
3State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Xuzhou, Jiangsu 221116, China

Received 2 October 2014; Revised 26 January 2015; Accepted 29 January 2015

Academic Editor: Marcin A. Lutynski

Copyright © 2015 Jingyi Cheng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. S. Peng, Ground Control Failures: A Pictorial View of Case Studies, Syd S. Peng, Morgantown, WVa, USA, 2007.
  2. S. S. Peng, “Topical areas of research needs in ground control—a state of the art review on coal mine ground control,” Journal of China University of Mining & Technology, vol. 44, no. 1, pp. 1–8, 2015. View at Publisher · View at Google Scholar
  3. W. Li, J. Bai, S. S. Peng, X. Wang, and Y. Xu, “Numerical modeling for yield pillar design: a case study,” Rock Mechanics and Rock Engineering, vol. 48, no. 1, pp. 305–318, 2013. View at Publisher · View at Google Scholar
  4. F. A. Donath, “Effects of cohesion and granularity on deformational behavior of anisotropic rock,” Geological Society of America, vol. 135, pp. 95–128, 1972. View at Publisher · View at Google Scholar · View at Scopus
  5. H. Niandou, J. F. Shao, J. P. Henry, and D. Fourmaintraux, “Laboratory investigation of the mechanical behaviour of tournemire shale,” International Journal of Rock Mechanics and Mining Sciences, vol. 34, no. 1, pp. 3–16, 1997. View at Publisher · View at Google Scholar · View at Scopus
  6. E. M. van Eeckhout and S. S. Peng, “The effect of humidity on the compliances of coal mine shales,” International Journal of Rock Mechanics and Mining Sciences and, vol. 12, no. 11, pp. 335–340, 1975. View at Publisher · View at Google Scholar · View at Scopus
  7. M. E. Chenevert and C. Gatline, “Mechanical anisotropies of laminated sedimentary rocks,” The Society of Petroleum Engineers, vol. 5, no. 1, pp. 67–77, 1965. View at Publisher · View at Google Scholar
  8. R. McLamore and K. E. Gray, “The mechanical behavior of anisotropic sedimentary rocks,” Journal of Manufacturing Science and Engineering, vol. 89, no. 1, pp. 62–73, 1967. View at Publisher · View at Google Scholar
  9. A. Fahimifar, “Strength and deformation properties of a schist rock in Isfahan,” Iranian Journal of Science and Technology, Transaction B: Engineering, vol. 28, no. 5, pp. 617–622, 2004. View at Google Scholar · View at Scopus
  10. M. H. B. Nasseri, K. S. Rao, and T. Ramamurthy, “Anisotropic strength and deformation behavior of Himalayan schists,” International Journal of Rock Mechanics and Mining Sciences, vol. 40, no. 1, pp. 3–23, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. V. K. Singh, D. Singh, and T. N. Singh, “Prediction of strength properties of some schistose rocks from petrographic properties using artificial neural networks,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 2, pp. 269–284, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Ramamurthy, “Strength and modulus responses of anisotropic rocks,” Comprehensive Rock Engineering, vol. 1, pp. 313–329, 1993. View at Google Scholar · View at Scopus
  13. G. Khanlari, B. Rafiei, and Y. Abdilor, “Evaluation of strength anisotropy and failure modes of laminated sandstones,” Arabian Journal of Geosciences, pp. 1–14, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. M. Tien, M. C. Kuo, and C. H. Juang, “An experimental investigation of the failure mechanism of simulated transversely isotropic rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 8, pp. 1163–1181, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. M. Tien and P. F. Tsao, “Preparation and mechanical properties of artificial transversely isotropic rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 37, no. 6, pp. 1001–1012, 2000. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. M. Tien and M. C. Kuo, “A failure criterion for transversely isotropic rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 3, pp. 399–412, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. J. C. Jaeger, “Shear failure of anisotropic rocks,” Geological Magazine, vol. 97, no. 1, pp. 65–72, 1960. View at Publisher · View at Google Scholar
  18. R. Nova, “The failure of transversely isotropic rocks in triaxial compression,” International Journal of Rock Mechanics and Mining Sciences and, vol. 17, no. 6, pp. 325–332, 1980. View at Publisher · View at Google Scholar · View at Scopus
  19. O. Cazacu, N. D. Cristescu, J. F. Shao, and J. P. Henry, “A new failure criterion for transversely isotropic rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 3, no. 1, pp. 89–103, 1998. View at Google Scholar
  20. H. Ding, X. Miao, F. Ju, X. Wang, and Q. Wang, “Strata behavior investigation for high-intensity mining in the water-rich coal seam,” International Journal of Mining Science and Technology, vol. 24, no. 3, pp. 299–304, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. C. Meng, X. Li, Q. Yao, and J. Zhou, “Numerical research on stability control of roofs of water-rich roadway,” International Journal of Mining Science and Technology, vol. 24, no. 3, pp. 409–416, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Zhang, S. Tu, Q. Bai, and J. Li, “Overburden fracture evolution laws and water-controlling technologies in mining very thick coal seam under water-rich roof,” International Journal of Mining Science and Technology, vol. 23, no. 5, pp. 693–700, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. S. S. Peng, Coal Mine Ground Control, Syd S. Peng, Morgantown, WVa, USA, 3rd edition, 2008.
  24. G. M. Molinda, D. C. Oyler, and H. Gurgenli, “Identifying moisture sensitive roof rocks in coal mines,” in Proceedings of the 25th International Conference on Ground Control in Mining, pp. 57–64, West Virginia University, Morgantown, WVa, USA, 2006.
  25. E. M. van Eeckhout, The effect of moisture on the mechanical properties of coal mine shales [Ph.D. thesis], University of Minnesota, Minneapolis, Minn, USA, 1974.
  26. M. E. Chenevert, “Shale alteration by water adsorption,” Journal of Petroleum Technology, vol. 22, no. 9, pp. 1141–1148, 1970. View at Publisher · View at Google Scholar · View at Scopus
  27. B. Vasarhelyi, “Some observations regarding the strength and deformability of sandstones in dry and saturated conditions,” Bulletin of Engineering Geology and the Environment, vol. 62, no. 3, pp. 245–249, 2003. View at Publisher · View at Google Scholar · View at Scopus
  28. B. Vásárhelyi, “Statistical analysis of the influence of water content on the strength of the miocene limestone,” Rock Mechanics and Rock Engineering, vol. 38, no. 1, pp. 69–76, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. B. Vásárhelyi and P. Ván, “Influence of water content on the strength of rock,” Engineering Geology, vol. 84, no. 1-2, pp. 70–74, 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. A. B. Hawkins and B. J. McConnell, “Sensitivity of sandstone strength and deformability to changes in moisture content,” Quarterly Journal of Engineering Geology, vol. 25, no. 2, pp. 115–130, 1992. View at Publisher · View at Google Scholar · View at Scopus
  31. D. Li, L. N. Y. Wong, G. Liu, and X. Zhang, “Influence of water content and anisotropy on the strength and deformability of low porosity meta-sedimentary rocks under triaxial compression,” Engineering Geology, vol. 126, pp. 46–66, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. Z. A. Erguler and R. Ulusay, “Water-induced variations in mechanical properties of clay-bearing rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 46, no. 2, pp. 355–370, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Talesnick and S. Shehadeh, “The effect of water content on the mechanical response of a high-porosity chalk,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 4, pp. 584–600, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. ASTM D7012-10, Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens Under Varying States of Stress and Temperatures, ASTM International, West Conshohocken, Pa, USA, 2010.
  35. B. H. G. Brady and E. T. Brown, Rock Mechanics for Underground Mining, Springer, Berlin, Germany, 3rd edition, 2006.