Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015 (2015), Article ID 313259, 14 pages
http://dx.doi.org/10.1155/2015/313259
Research Article

The Coupling Dynamic Analysis and Field Test of TBM Main System under Multipoint Impact Excitation

1School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China
2School of Naval Architecture and Ocean Engineering, Dalian Ocean University, Dalian 116026, China

Received 18 December 2014; Accepted 2 June 2015

Academic Editor: Peng Chen

Copyright © 2015 Junzhou Huo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Promotion Center for Science & Technology Achievements of Ministry of Water Resources, Full Face Rock Tunnel Boring Machine (TBM), Petroleum Industry Press, Beijing, China, 2005.
  2. M. Cigla and L. Ozdemir, “Computer modeling for improved production of mechanical excavators,” in Proceedings of the Society for Mining, Metallurgy and Exploration Annual Meeting (SME '00), Salt Lake City, Utah, USA, February 2000.
  3. E. Schlangen and J. G. M. van Mier, “Simple lattice model for numerical simulation of fracture of concrete materials and structures,” Materials and Structures, vol. 25, no. 9, pp. 534–542, 1992. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Rostami, L. Ozdemir, and B. Nilson, “Comparison between CSM and NTH hard rock TBM performance prediction models,” in Proceedings of the Institute of Shaft Drilling Technology (ISDT) Annual Technical Conference, Las Vegas, Nev, USA, May 1996.
  5. Z. Zhang and C. Mao, “Statistical analysis of dis cutter pressing mark results about full face rock tunnel boring machine,” Modern Electic Power, vol. 13, no. 1, pp. 63–68, 1996. View at Google Scholar
  6. H. Zhang, “Study on numerical simulations of performance of tunnel boring machine (TBM),” Tunnel Construction, vol. 26, supplement 2, pp. 1–7, 2006. View at Google Scholar
  7. A. E. Samuel and L. P. Seow, “Disc force measurements on a full-face tunnelling machine,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 21, no. 2, pp. 83–96, 1984. View at Publisher · View at Google Scholar · View at Scopus
  8. Z. X. Zhang, S. Q. Kou, and P.-A. Lindqvist, “In-situ measurements of cutter forces on boring machine at Äspö Hard Rock Laboratory. Part II. Characteristics of cutter forces and examination of cracks generated,” Rock Mechanics and Rock Engineering, vol. 36, no. 1, pp. 63–83, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. Z. Zhang, J. Zhou, and R. Liu, “Analysis of the mechanic model of cutterhead bearing of a full face rock tunnel boring machine,” Journal of Basic Science and Engineering, vol. 18, no. 1, supplement, pp. 225–232, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. Z. Zhang and D. Ye, “Determination and analysis of cutter pitch on rock tunneller,” Design and Calculation, no. 11, pp. 11–12, 2002. View at Google Scholar
  11. Q. Tang, Z.-J. Xu, Y.-M. Xia, and K. Zhang, “Numerical study on mode of breaking rock by TBM cutter in two cutting orders,” Journal of Central South University, vol. 43, no. 3, pp. 940–946, 2012. View at Google Scholar · View at Scopus
  12. Y. Xia, T. Ouyang, X. Zhang, and D. Luo, “Mechanical model of breaking rock and force characteristic of disc cutter,” Journal of Central South University, vol. 19, no. 7, pp. 1846–1852, 2012. View at Publisher · View at Google Scholar
  13. Q. Tan, N. Yi, Y. Xia, Z. Xu, Y. Zhu, and J. Song, “Reserch on rock dynamic fragmentation characteristics by TBM cutters and cutter spacing optimization,” Chinese Journal of Rock Mechanics and Engineering, vol. 31, no. 12, pp. 2453–2464, 2012. View at Google Scholar
  14. J. Huo, W. Sun, J. Chen et al., “Disc cutters' layout design of the full-face rock tunnel boring machine (TBM) using a cooperative coevolutionary algorithm,” Journal of Mechanical Science and Technology, vol. 25, no. 2, pp. 415–427, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Huo, Y. Shi, H. Teng, R. Chai, and L. Zhang, “Cutter layout design of full-face rock tunnel boring machine (TBM),” China Mechanical Engineering, vol. 19, no. 15, pp. 1832–1836, 2008. View at Google Scholar · View at Scopus
  16. Z. Li, J. Huo, W. Sun et al., “Cutterhead structure optimal design of the full-face rock tunnel boring machine,” Machine Design & Research, vol. 27, no. 1, pp. 83–86, 2011. View at Google Scholar
  17. H. Zhang and N. Zhang, “Brief discussion on cutterhead vibration of type 803E TBM,” Tunnel Construction, vol. 27, no. 6, pp. 76–78, 2007. View at Google Scholar
  18. K. Zhang, Study on dynamic characteristics of redundantly driven revolving system of shield TBM [Ph.D. thesis], Shanghai Jiao Tong University, Shanghai, China, 2011.
  19. J. Cai, Dynamic performance analysis and parameter optimization of wind power speed-up machine planetary gear trains [M.S. thesis], Dalian University of Technology, Dalian, China, 2012.
  20. J. Yang, Study on dynamics characteristics of planetary gear transmission system of wind turbine under varying loads [Ph.D. thesis], Chongqing University, Chongqing, China, 2012. View at Scopus
  21. W. Sun, J. Ling, J. Huo, L. Guo, X. Zhang, and L. Deng, “Dynamic characteristics study with multidegree-of-freedom coupling in TBM cutterhead system based on complex factors,” Mathematical Problems in Engineering, vol. 2013, Article ID 635809, 17 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Huo, H. Wu, J. Yang, W. Sun, G. Li, and X. Sun, “Multi-directional coupling dynamic characteristics analysis of TBM cutterhead system based on tunneling field test,” Journal of Mechanical Science and Technology, vol. 8, no. 29, pp. 1–16, 2015. View at Google Scholar
  23. Y. Dai, “The cylinder hydraulic stiffness calculation,” Nonferrous Metals Design, vol. 26, no. 1, pp. 61–62, 1999. View at Google Scholar
  24. H. Zhao, Q. Chen, and K. Huang, “Fractal model of normal contact stiffness between two cylinders' joint interfaces,” Journal of Mechanical Engineering, vol. 47, no. 7, pp. 53–58, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. S. Deng and Q. Jia, Design Principles of Rolling Bearings, Standards Press of China, Beijing, China, 2008.