Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015, Article ID 406294, 8 pages
http://dx.doi.org/10.1155/2015/406294
Research Article

Constant Cutting Force Control for CNC Machining Using Dynamic Characteristic-Based Fuzzy Controller

Department of Mechanical Engineering, Tianjin University, Weijin Road, Tianjin 300072, China

Received 14 November 2014; Revised 26 December 2014; Accepted 26 December 2014

Academic Editor: Vadim V. Silberschmidt

Copyright © 2015 Hengli Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Hengli Liu, Taiyong Wang, and Dong Wang, “Constant Cutting Force Control for CNC Machining Using Dynamic Characteristic-Based Fuzzy Controller,” Shock and Vibration, vol. 2015, Article ID 406294, 8 pages, 2015. https://doi.org/10.1155/2015/406294.