Table of Contents Author Guidelines Submit a Manuscript
Shock and Vibration
Volume 2015 (2015), Article ID 431476, 12 pages
http://dx.doi.org/10.1155/2015/431476
Research Article

Modeling and Application of Process Damping in Milling of Thin-Walled Workpiece Made of Titanium Alloy

1College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2Xi’an Institute of Applied Optics, Xi’an 710065, China

Received 20 August 2014; Revised 25 October 2014; Accepted 13 November 2014

Academic Editor: Didier Rémond

Copyright © 2015 Xin Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Xin Li, Wei Zhao, Liang Li, Ning He, and ShengWei Chi, “Modeling and Application of Process Damping in Milling of Thin-Walled Workpiece Made of Titanium Alloy,” Shock and Vibration, vol. 2015, Article ID 431476, 12 pages, 2015. doi:10.1155/2015/431476